[geeks] Cisco STS-10x Terminal Server Programming

[Fogg, James]

I found a doc on cisco's website. I quickly scanned it and it seems to have
some relative info., esp about when the machine tries to netboot and setting
some bits to make it use the CR entry point into flash.

I am sending it to your email address, so if you're on dialup it may take a
while to download.

> -----Original Message-----
> From: Kris Kirby [mailto:kris at catonic.net]
> Sent: Friday, September 14, 2001 11:14 PM
> To: 'geeks at sunhelp.org'
> Subject: RE: [geeks] Cisco STS-10x Terminal Server Programming
> 
> 
> On Fri, 14 Sep 2001, Fogg, James wrote:
> > I am not familiar with the STS-10x, but based on every 
> other peice of Cisco
> > I have touched in 10 years, you are looking at a config 
> register issue.
> > Anything with a CF issue will behave this way.
> >
> > If you find yourself stuck I can get tech support to tell 
> me the one or two
> > places that CF should be.
> 
> Have tried setting the CF register to 0x2102 but it doesn't stick and
> doesn't change the default behavior. I'm also unable to locate another
> Cisco STS-10x in my area.
> 
> -----
> Kris Kirby, KE4AHR          | TGIFreeBSD... 'Nuff said.
> <kris at nospam.catonic.net>   |
> -------------------------------------------------------
> "Fate, it seems, is not without a sense of irony."
> 
> 
> _______________________________________________
> GEEKS:  http://www.sunhelp.org/mailman/listinfo/geeks
>