[geeks] Creator 3D graphics on a Sony 400PS

[Jonathan C. Patschke]

On Sat, 7 Aug 2004, Charles Shannon Hendrix wrote:

> I used a 13W3->BNC video cable that was sold as being for Sun video
> cards.

So it has 4 BNC connectors on it, right?

> When I switch to BNC input (front-panel switch) it says the signal is
> out of range, or it syncs to something but the screen is just blank.

Try moving the "sync" BNC to the other sync connector.  Some monitors do
composite sync on V and some do it on H.  V is more common, though.

> Is it possible that I should *not* hook all of the BNC connections up,
> or maybe swap the sync cables?

5, huh?  Disconnect the H sync, then.

-- 
Jonathan Patschke )"We're Germans and we use Unix.  That's a combination
Elgin, TX        (  of two demographic groups known to have no sense of
USA               ) humour whatsoever." - Hanno Mueller in de.c.o.u.p