[geeks] MVME/VME boards?

[Plamen Mihaylov]

MVME197LE has at least 32mb onboard memory, so you can safely make the test
without the expansion board.

On Sun, Oct 23, 2016 at 9:54 PM, Cory Smelosky <b4 at gewt.net> wrote:

> RAM module.
>
> Sent from my iPhone
>
> > On Oct 23, 2016, at 10:06, Plamen Mihaylov <plamenspam at afterpeople.com>
> wrote:
> >
> > Oh sorry, i made a typo. The right sequence is to hold reset and abort
> for
> > 5 seconds, then release reset and holding abort for another 5 seconds,
> then
> > release abort switch.
> > What is the other board? MVM712 with P2 adapter or MVME297 ram module ?
> >
> >> On Sun, Oct 23, 2016 at 7:31 PM, Cory Smelosky <b4 at gewt.net> wrote:
> >>
> >> On Sun, 23 Oct 2016, Plamen Mihaylov wrote:
> >>
> >> Also if the flash memory doesn't has the debugger firmware, you have to
> >>> boot from bootbug(eprom).
> >>> Press abort and reset front buttons for 5 seconds, then release reset
> and
> >>> hold the reset for another 5 seconds.
> >>>
> >>>
> >> Release reset and then press it again?
> >>
> >>
> >> --
> >> Cory Smelosky
> >> http://gewt.net Personal stuff
> >> http://gimme-sympathy.org Projects
> >> _______________________________________________
> >> GEEKS:  http://www.sunhelp.org/mailman/listinfo/geeks
> > _______________________________________________
> > GEEKS:  http://www.sunhelp.org/mailman/listinfo/geeks
> _______________________________________________
> GEEKS:  http://www.sunhelp.org/mailman/listinfo/geeks