[SunRescue] 3/160 won't pass diag. test

[William Janssen]

Thanks for the correction. Didn't know what they ment by NXM.
Now I know to check the memory very carefully.

Thanks
Bill K7NOM

Martin Frost wrote:

> This doesn't refer to an `NXM bus' which is at fault: the NXM bus
> error test is the test that accessing nonexistent memory correctly
> causes a bus error. If your machine fails the test, then something
> is at fault with either your MMU or the memory boards.
>
> If you have external memory boards then try taking them out to see
> if the problem goes away, then swap them back one at a time to work
> out where the problem lies.
>
> It is conceivable that a memory board configured for a different
> amount of physical memory to that actually present could cause a
> failure on this test.
>
> --m
>
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue