[SunRescue] Sun 3/60 Ethernet

[Clay Mellender]

Sure is. Therei is a row of dip switches about 2 inches from the BNC on the
mother board. Reverse all of them, and it will change AUI to BNC or vice
versa. I Think that they go to the side of the connector you want, but am
not positive.
Clay
----- Original Message -----
From: "Paul Khoury" <pkhoury3 at earthlink.net>
To: "SunRescue List" <rescue at sunhelp.org>
Sent: Friday, February 04, 2000 12:42 PM
Subject: [SunRescue] Sun 3/60 Ethernet


> I recently aquired a Sun 3/60 from a friend, and am having trouble getting
it to boot.
> It doesn't seem to transmit any packets at all while trying to netboot
NetBSD - but my Sun 3/75
> works fine (was 14 days uptime when taken offline).  Is there a switch,
software or hardware, I need
> to set to tell the board that I'm using the AUI port?
>
> Thanks,
>
> Paul
>
>
>
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
>