[SunRescue] Parity memory board in 4/600??

[James Lockwood]

On Tue, 15 Feb 2000, Gregory Leblanc wrote:

> > -----Original Message-----
> > From: Geoff Koehler [mailto:gdak at home.com]
> > Sent: Sunday, February 13, 2000 9:53 PM
> > To: rescue at sunhelp.org
> > Subject: [SunRescue] Parity memory board in 4/600??
> > 
> > 
> > Hi All,
> > 
> > Just wondering ....  Will a Parity memory board from an old 
> > 4/370 work with a 4/600??
> 
> Those should both be 30-pin parity simms, so they should be swappable.
> Check http://sun-ref.sunhelp.org/ to be sure
> 	Greg

I think that what Geoff was asking was whether or not the entire VME board
could be swapped.  It can't.  Sparc VME memory boards are not
interchangable.

If the SIMMs are 80ns or better, then they can be moved from one board to
another.

-James