[SunRescue] ss20 error
Chris Drelich
hyena at interport.net
Sun Mar 19 09:09:59 CST 2000
Hmm, just tried set it "Motor Start" and no such luck, still the same errors.
:( The webpage for the system is
http://www.seagate.com/support/disc/specs/scsi/st39173wc.html if anyone has the
time to help me figure out this mystery, it would be greatly appreciated.
Chris
Gregory Leblanc wrote:
>
> > -----Original Message-----
> > From: Chris Drelich [mailto:hyena at interport.net]
> > Sent: Saturday, March 18, 2000 10:27 AM
> > To: rescue at sunhelp.org
> > Subject: [SunRescue] ss20 error
> >
> >
> > Can someone tell me what this might mean, and how I might go
> > about fixing it?
> > This is on an ss20, the problem drive is a Seagate
> > Baracuda(ST39173WC), I've
> > been trying many things and asking many people, and yet to
> > get a answer that
> > gets it to work. This hard drive is known to be working, so
> > thats not the
> > problem. This is the error:
> >
> > WARNING:
> > /iommu at f,e000000/sbus at f,e0001000/espdma at f,400000/esp at f,800000/sd at 1,0 :
> > Error for Command: load/start/stop Error
> > Level: Retryable
> >
> > 0
> > Vendor: SEAGATE Serial Number:
> > Sense Key: Not Ready
> > ASC: 0x4 (LUN not ready), ASCQ: 0x0, FRU: 0x2
> >
> >
> > It does this a few times and then goes "offline."
>
> Hmm, what are the jumpers set to on this drive? That doesn't look to me
> like an SCA part number, but I never can remember, maybe that's what the C
> means... Basically the error message is saying that the drive is not
> replying to the load/start/stop commands. How is the auto-start/spin-up
> jumper set? Try chaning that. IIRC, the termination power jumper should be
> removed on internal drives to the SS20, if the drive has one. It's been a
> while since I've played with those drives, so maybe they don't have
> termpower.
> Greg
>
> _______________________________________________
> Rescue maillist - Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
More information about the rescue
mailing list