[SunRescue] 386i/250 booting

[Gregory Leblanc]

Try booting into single user mode (boot -s).  If you read the Solaris2 FAQ,
there's a file that you can "touch", IIRC, that will let you go through and
re-configure just about everything.  I just can't remember the file/command
to do that.  It IS in the FAQ, though.
	Greg

> -----Original Message-----
> From: sac65531 at saclink.csus.edu [mailto:sac65531 at saclink.csus.edu]
> Sent: Sunday, March 12, 2000 11:20 AM
> To: rescue at sunhelp.org
> Subject: [SunRescue] 386i/250 booting
> 
> 
> the machine seems to start fine, but when it attempts to start 
> services it stops with these messages:
> 
> ie0: problem with network connection. Check cables and tranceivers.
> 
> yp: server not responding for domain "olympus"; still trying.
> 
> this machine was previously attached to a network and no doubt it is 
> looking for it. i want to set it up as a stand alone for 
> now... but i don't 
> know how to get into it to change the settings.
> 
> i am also wondering if this might be evidence of the dreaded 
> NVRAM failure i have read about in some other threads.
> 
> thanks,
> carl
> 
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
>