[SunRescue] Strange module-info output on an SS10

[Mike Nicewonger]

ACK I forgot, you will also need PROM rev 2.22.1H or better to use that CPU
if it is a 55MHz HyperSPARC.

Mike N
----- Original Message -----
From: Joe Ammond <jra at twinight.org>
To: <rescue at sunhelp.org>
Sent: Wednesday, March 29, 2000 4:20 PM
Subject: [SunRescue] Strange module-info output on an SS10


> I'm putting together an SS10, and I'm getting strange results from the
> PROM command "module-info".  The MBus module in question is a dual-55Mhz
> Ross HyperSPARC module (slow, but I can't beat the $0 price).
>
> SPARCstation 10 MP (2 X 625), No Keyboard
> ROM Rev. 2.12, 64 MB memory installed, Serial #6339435.
> Ethernet address 8:0:20:17:fd:6, Host ID: 7260bb6b.
>
>
> <#0> ok .version
> Release 2.12 Version 2 created 93/03/29 14:25:15
> <#0> ok module-info
> CPU# 0 :  05.5 MHz  CY620 / CY625
> CPU# 1 :  04.2 MHz  CY620 / CY625
>
> Has anyone seen this before?  My guess is that I need to upgrade
> the PROM in this to something newer (2.25?).
>
> Also, does anyone have any 55Mhz Ross modules they're not using?
> (or any slow speed ones?)  I can trade for some various old Sun
> pieces (4/110 mboard, cg3 and GX cards).  I remember scsistuff selling
> 66mhz cards for $30 a couple of years back, but they seem to be all out
> now.
>
> ja.
> --
> Joe Ammond
jra at twinight.org
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
>