[rescue] What to do with a 630mp?

[Zach Malone]

I think you mentioned running OpenBSD.  I know it does not support multiple
CPUs, but I am unaware as to whether or not it will recognize multiple chips
on boot up.  Could you have a 4x40mhz system there?
    Zach
----- Original Message -----
From: "BSD Bob the old greybeard BSD freak"
<bobkeys at weedcon1.cropsci.ncsu.edu>
To: <rescue at sunhelp.org>
Cc: "BSD Bob the old greybeard BSD freak"
<bobkeys at weedcon1.cropsci.ncsu.edu>
Sent: Thursday, August 23, 2001 12:30 PM
Subject: Re: [rescue] What to do with a 630mp?


> >   ...and if you put beefier CPUs in it, it's even better. :)  Five
> > bucks is a steal.
>
> If, in the proper care and feeding of suntoyz.....(:+}}..., I wanted to
> feed it beefier beefcake cpus (gads!)..... what particular part numbers
> should I be looking for, and will it require ram speedups for the on-board
> ram?  I have zero info for this critter so am mostly shooting from the hip
> on it.  It seems to be full up on 4mb 30 pin ram sticks.  It has one cpu
> board with 6 heat sinks marked Ross on it, but the dmesg on boot indicated
> only a 4/600 cpu at 40mhz, so I am expecting it is one of the lesser
cpu's.
>
> Bob
>
> _______________________________________________
> rescue maillist  -  rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue