[SunRescue] Ultra1

[Peter L. Wargo]

It depends on which Ultra1 you are getting - if it is a "E" series system,
you can use a UPA Creator or Creator 3D card in it (As well as an Sbus).
If it is a "non-E" you can only use Sbus.

As for the CG6, it depends on the type.  Forget the dual-slot ones, they
will not work.  Many single-slot ones will, Email me the Part # and I'll
look it up in the FE handbook.

If you're not sure if the Ultra 1 is an "E" or not, just look at the back
panel.  The 'E" series has a F/W (68-pin) SCSI connector off the
motherboard, the "non-E" has a narrow (50-pin) connector.

BTW, if you have an "E" series, I have seen UPA creator 3D cards in the
$50-100 range from time to time.

-Pete

-----
Peter L. Wargo
pwargo at basenji.com
Owner/operator of basenji.com.

On Mon, 12 Feb 2001, Dan Lane wrote:

> 
> Hi,
> 
> I have been (well, am about to be) given a headless ultra1, can anyone
> tell me  what kind of gfx card I need to obtain? Does the ultra1 use
> sbus?? if so can I transplant a CG6 from my SS2 or should I be looking
> for something along the lines of a Creator3d?
> 
> cheers,
> 
> -- 
> Dan Lane (d at x11.net)
> 
> Web: http://www.logicbomb.net
> PGP Key: http://www.logicbomb.net/pgpkey
> 
> 
> 
> 
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
>