[SunRescue] Setup Sun box with Cable modem ISP

[Les]

Just went thru this with cable modem. I wanted to maintain static
addresses on my home network. Bought a LinkSys router & set up
config like the one U used with the DSL setup - DHCP on the LinkSys
for the cable LAN & static on the intranet side. Works fine & the 1 port
LinkSys is less than $100.

Les
----- Original Message -----
From: "Craig Steinberger" <cjs at pobox.com>
To: <rescue at sunhelp.org>
Sent: Tuesday, February 20, 2001 7:52 AM
Subject: Re: [SunRescue] Setup Sun box with Cable modem ISP


> It sounds to be me that you need to set up the Sun box to be a DHCP client
> on the interface connected to the cable modem. Which OS are you running?
>
> -Craig
>
> on 2/19/01 6:12 PM, mnapaul1 at netscape.net at mnapaul1 at netscape.net wrote:
>
> > Thank you for your feedback:
> >
> > When I had dsl connection, there was a router between the lan and dsl
modem.
> > Under DSL setup, we had static IP address vs. dynamic ip address used in
cable
> > modem.
>
>
> --
> Craig Steinberger
> cjs at pobox.com
>
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
>