[SunRescue] Re: Rescue digest, Vol 1 #968 - 17 msgs

[Mike Nicewonger]

On some framebuffers the 1662B acts odd. Try starting the machine, then
unplugging the monitor and then reconnect it.

It is also possible your framebuffers have been set to a size/sync not
compatible with the 1662. If the framebuffers are set wrong you can return
them to default by at the open boot prompt (the >ok prompt) typing:

setenv defaults output-device

I think that is the correct command.

Mike N
----- Original Message -----
From: "Michael Schiller" <schiller at agrijag.com>
To: <rescue at sunhelp.org>
Sent: Wednesday, February 21, 2001 2:12 AM
Subject: [SunRescue] Re: Rescue digest, Vol 1 #968 - 17 msgs


> I see messages about the GDM-1962B, so I'll add my own question about
them...
>
> I have 2 of these monitors, and I've tried them on a Sparc 5 with a TGX
card, one with a ZX card, and with either card the monitors didn't seem to
work, looked like the weren't syncing or something. Did the 1962 use a
special
> cable? Or is it only compatible with certain models? Or are these monitors
just toast? Thanks.
>
> -Mike
> --
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> PGP fingerprint= D2 4F A8 B7 13 D5 73 1E  48 99 40 99 F9 BC 74 74
> Email: schiller at agrijag.com           Web: http://www.agrijag.com
> Voice: 423-625-6349               FAX: 423-623-9054
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>
>
> _______________________________________________
> Rescue maillist  -  Rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
>