[rescue] Viewsonic VG150 -- was Can you run a Creator 2D at 1600x1024 (SGI

[Larry Snyder]

Ok, I got impatient.  It's plug & go, and beautiful :-).
Stay below 75 Hz V and 62kHz H, and the video B/W is 65 MHz.  The desktop
looked like it may need a bit of color temp tuning, but flesh tones look
pretty normal, and there's (of course) no focus problems.  Excellent!
BTW, I had a couple folks at work jump to the Dell site and didn't see
the 20% discount.  Dunno what's going on there, have to look a bit closer.
enjoy,
-ls-

"Ken Hansen" <n2vip at yahoo.com> wrote:
> looks to be, I haven't powered it up yet, but it came yesterday (I wasn't
> here to sign, so I went and picked it up at lunch...)
> 
> I'll report back my findings to the group - the $30 coupon is gone, but free
> s/h, 20% off and rebate still apply. :^)
> 
> Ken
> ----- Original Message -----
> From: "Larry Snyder" <larrys at lexisnexis.com>
> To: <rescue at sunhelp.org>
> Sent: Friday, July 27, 2001 6:27 PM
> Subject: [rescue] Viewsonic VG150 -- was Can you run a Creator 2D at
> 1600x1024 (SGI
> 
> 
> > So, Ken -- did yours show up yet?  I snagged one (helluva deal) and
> > before I replace the 17E20 on the Alpha with it thought I'd see if
> > there's any gotcha's or xfree changes I need to make.  I pulled up
> > the pdf on the included cd, and it looks like a plug-and-go at
> > 1024X768.  That the case?
> > thanx,
> > -ls-
> 
> 
> 
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
> 
> _______________________________________________
> rescue maillist  -  rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue