[SunRescue] nextstep/pa-risc

[Mike Nicewonger]

Make sure you have the block jumper set on the Plextor. NS wants to see a
512 byte block drive. Also change the CD-ROM to ID 6 and the hard disk to 1
or 2. NS wants to see the CD-ROM at 6.

Mike N
----- Original Message -----
From: "Mattias Nordlund" <mathew at eagle.y.se>
To: <rescue at sunhelp.org>
Sent: Friday, June 01, 2001 4:46 PM
Subject: Re: [SunRescue] nextstep/pa-risc


>
> On Fri, 1 Jun 2001 ward at zilla.nu wrote:
>
> > On Fri, Jun 01, 2001 at 10:13:22PM +0200, Mattias Nordlund wrote:
> > >
> > > Does anyone have installation instructions for how to install nextstep
on
> > > a 712/60?
> >
> > Boot from CD, follow instructions.  Pretty much all there is.  Got any
> > specific questions?
> >
>
> I boot from CD, and then it just sits there =)
>
> It fins the network then hangs on:
> Registering event0:
>
> CD (Plextor 40x, works nice with HP-UX) is ID0
> Disk (ST12400, works with HP-UX) is ID6
>
> Mattias
>
> _______________________________________________
> rescue maillist  -  rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
>