[SunRescue] metatool / disksuite problems

[Kevin Loch]

Is portmap running?

KL

Bill Bradford wrote:
> 
> Installed DiskSuite 4.2.1, rebooted, running Metatool to setup the
> RAID-5 devices.  However, Metatool dosent show any of the controllers
> or disks on the machine, no matter what I do.
> 
> I'm running eXceed on my Windows machine, exporting the DISPLAY off
> the E250 (which has 6 18G drives) to the PC.
> 
> Here's the startup messages from metatool.  Any suggestions?
> 
> root at macanudo:~> metatool
> Warning: Cannot convert string "lucidasans-bold12" to type FontStruct
> Warning: Cannot convert string "lucidasans8" to type FontStruct
> Warning: Cannot convert string "lucidasans-typewriter12" to type FontStruct
> Warning: Cannot convert string "lucidasans12" to type FontStruct
> Initializing metatool... Done.
> Discovering drives and slices... macanudo: RPC: Program not registered
> macanudo: RPC: Program not registered
> macanudo: RPC: Program not registered
> Done.
> Discovering database replicas... Done.
> Discovering hot spare pools... Done.
> Discovering concat/stripes...Done.
> Discovering RAID devices... Done.
> Discovering mirrors... Done.
> Discovering trans devices... Done.
> Updating mount and swap information... Done.
> 
> <it then fires up the X interface>
> 
> Looked through inetd, re-enabled the Tooltalk stuff, but that didnt
> make a difference...
> 
> Bill
> 
> --
> Bill Bradford
> mrbill at mrbill.net
> Austin, TX
> _______________________________________________
> rescue maillist  -  rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue