[rescue] sparc 10 won't boot

[Arthur Wouk]

so far i have two suggestions, based on the following description. one
is that it is a scsi problem, the other that it is a ram problem.
amy other suggestions?


>sparc10, ross hypersparc 142mh, ross 2.25R prom, quantum fireball
>2gig hard drive, solaris 2.6
>
>
>i came to the machine and it did not respond to touching a keyboard
>key (the monitor was dark after the ten minute no use period).
>
>nothing would get it going - stop-A was not functioning.
>
>i powered off, and then, after a bit, on again. the screen lit up, the
>usual header information came on, and it started boot. 
>
>then it started mountall. in the middle of that the screen got data
>too fast for me to see what started the problem, it entered
>something called traceback.
>
>when the traceback ended i had the following screen:
>
>
>...
>Called from 13840, fp=effffd48, args=2 1 0 1 16610 f60dd890
>End traceback...
>panic: Illegal instruction
>syncing file systems...BAD TRAP: type=9 rp=fbf69fdc addr=155cc mmu_fsr=3aa rw=2
>in.routed: Data fault
>kernel write fault at addr0x155c, pme-0x15e15aa
>MMU sfsr=3aa; Protection error on supv data store at level 3
>pte addr - 0xf59c4554, level = 3
>pid=109, [c=0xf0090808, sp=0xfbf6a028, psr=0x1e400cc4, context=5
>g1-g7; 628bdbb, 0, f02ae064, 1c000, fbf6ab80, 1, f5932w0
>panic: Data fault
>rebooting ...
>Resetting ...
>
>then a reboot starts, and i get to the Rebooting with command: calling
>for the disk at sd at 3,0,
>
>and then everything hangs. the keyboard is locked out. nothing i try
>does anything, except for power off.