[rescue] Re: [VAX] KZQSA deaded?

[meltie]

On Monday 01 March 2004 21:37, meltie wrote:
> Hi guys
>
> I've aquired a KZQSA through my dealer. I've been through CONFIGURE and
> set it up correctly for my system - apparently it only needs to sit at
> the default base and csr, and it is the only device in the memory map
> according to SHOW QBUS. I know the slot's ok as a KFQSA is happy to sit
> there.
>
> When I boot my 4000/200 (KA660) with it in, the boot output looks like
> this:
>
> KA660-A V3.7, VMB 2.12
> Performing normal system tests.
> 95..94..93..92..91..90..89..88..87..86..85..84..83..82..81..80..
> 79..78..77..76..75..74..73..72..71..70..69..68..67..66..65..64..
> 63..62..61..60..59..58..57..56..55..54..53..52..51..50..49..48..
> 47..46..45..44..43..42..41..40..39..38..37..36..35..34..33..32..
> 31..30..29..28..27..26..25..24..23..22..21..20..19..18..17..16..
> 15..14..13..12..11..10..09..08..07..06..05..
>
> ?86 2 0A FF 0000 0000 00       ; SUBTEST_86_0A, DE_QZA_DMA.LIS
>
> P1=200002C0  P2=00000000  P3=30040000  P4=00000000  P5=00000000
> P6=00000000  P7=00000000  P8=00000000  P9=00000000 P10=00000000
> r0=00000054  r1=200001BF  r2=00000000  r3=20140000  r4=200560E8
> r5=20056124  r6=20063ACB  r7=200002C0  r8=00000008 EPC=00000000
> 04..03..
> Normal operation not possible.
>
>
>
> ...with the FP LED stopped at "7". I've tried it as a stripped-bare
> system with CPU, one 8-meg memory board and the KZQSA, too. Same result.
>
> Be my KZQSA shagged, or merely cack-handedly set up?
>
> cheers
> alex/melt