[rescue] E4000 installation

[Michael Vergallen]

I'm asking this because the maintenance led is blinking on both the cpu boards whereever I put them...what is the possible cause of that. Also the memory on the cpu boards are sitting wierd e.i. only half the banks are filled on each board. e.i. I have 2 Giga of memory 
but only 1/2 the memory sockets on board one is filled and the same on board two also what is the sequence they should be installed ?

Michael

> -----Original Message-----
> From: rescue-bounces at sunhelp.org 
> [mailto:rescue-bounces at sunhelp.org]On Behalf Of Michael Vergallen
> Sent: Wednesday, June 08, 2005 2:02 AM
> To: rescue at sunhelp.org
> Subject: [rescue] E4000 installation
> 
> 
> first off I would like to say Jesus christ those bastard things 
> are hevy to lug up a flight of stairs...so I had to disasemle it 
> completely.
> No problem there ..,that went ok. However due to the pressure of 
> time and the nagging of the tennents of the building I forgot to 
> write down 
> where the cards are supposed to go back.  So my question now is 
> does it matter where the individual boards go ? 
> or can I just plug them in whatever slot I want to ?
> 
> Michael 
> -- 
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.6.4 - Release Date: 6/6/2005
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
> 
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.6.4 - Release Date: 6/6/2005
> 
-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.4 - Release Date: 6/6/2005