[rescue] 50-pin SCSI ribbon cables?

[Patrick Finnegan]

On Thursday 24 May 2007 18:48, Sridhar Ayengar wrote:
> If you're going to do that, you might be able to get away with using a
> Molex plug in there if you put a 90-degree bend in the pins on the
> plug and point the connector off to the side.  I'm pretty those pins
> would be strong enough.

At that point, I'd probably unsolder the connector, and solder a short 
jumper with a male molex on the other end in its place...

Pat
-- 
Purdue University ITAP/RCAC       --- http://www.rcac.purdue.edu/
The Computer Refuge               --- http://computer-refuge.org