[rescue] Cisco Catalyst 5000 FDDI Software

[Zach Lowry]

On May 27, 2008, at 9:50 PM, Dan Sikorski wrote:

> Cat5k> (enable) show module
> Mod Module-Name         Ports Module-Type           Model    Serial- 
> Num Status
> --- ------------------- ----- --------------------- ---------  
> --------- -------
> 1                       2     100BaseTX Supervisor  WS-X5009   
> 006342947 faulty
> 2                       2     MM MIC FDDI           WS-X5101   
> 007640097 ok
> 3                             Gigabit Ethernet Ext  WS-X5410   
> 021230167
> 4                       9     Gigabit Ethernet      WS-X5410   
> 021230167 ok
> 5                       24    10/100BaseTX Ethernet WS-X5234   
> 014589615 ok
>
> Mod MAC-Address(es)                        Hw     Fw         Sw
> --- -------------------------------------- ------ ----------  
> -----------------
> 1   00-10-1f-a6-18-00 to 00-10-1f-a6-1b-ff 2.3    2.2(2)     4.5(4)
> 2   00-e0-1e-e5-0b-35                      1.3    2.1        3.2(2)
> 4   00-e0-1e-7c-5a-18 to 00-e0-1e-7c-5a-23 1.2    4.2(5)     5.5(3)
> 5   00-d0-bc-03-8c-28 to 00-d0-bc-03-8c-3f 1.0    4.5(2)     4.5(4)
>
> Mod SMT User-Data              T-Notify CF-St    ECM-St    Bypass
> --- -------------------------- -------- -------- --------- -------
> 2   WorkGroup Stack            30       thru     in        absent
> Cat5k> (enable)

Ah, see, you have the latest version! If only we could figure out a  
way to trade. :) I don't think there's any way to download the  
software *off* the module, only *onto* it.

Mod MAC-Address(es)                        Hw     Fw         Sw
--- -------------------------------------- ------ ----------  
-----------------
3   00-60-2f-33-a9-10                      1.0    1.1        1.5