[rescue] Can a drive from an EMC be used an a SunBlade

[Curtis H. Wilbar Jr.]

Sandwich Maker wrote:
> " From: "Curtis H. Wilbar Jr." <rescue at hawkmountain.net>
> " 
> " []
> " 
> " Well, FC drives are similar to SCA SCSI Drives.... all functions on one 
> " connector, and the drive is intended to go into a backplane.  So, any
> " modification of the system would involve an alteration of the FC
> " backplane in my SunBlade 2000... which is not something I'd want to
> " do.... then there is the issue of is the 5V to be left unconnected, or
> " is 12V to be send on the pins where 5V normally would be ?
>
> i wonder if it's possible to pull the relevant emc docs up online...
> or perhaps seagate would respond to the p/n; they used to have config
> info for drives going back to the cdc days.
>   

The only config information is what pins can be hooked to LEDs for
various status information....

No pins for drive config....

-- Curt

> ________________________________________________________________________
> Andrew Hay                                  the genius nature
> internet rambler                            is to see what all have seen
> adh at an.bradford.ma.us                       and think what none thought
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue