[rescue] FS/FT HP DL580 G2

[John Francini]

These have an IEC320 C20 socket and require a cord with a C19 plug.

My go-to place for such is StayOnline.com.

j


On 9 Mar 2014, at 15:27 , Jonathan Katz <jon at jonworld.com> wrote:

> All,
>
> On my last e-mail I mentioned I had an HP DL580 G2 that wasn't working.
> That's not quite true. After reseating some things and blowing out some of
> the dust, it works just fine. Here are the specs:
>
> 4x 2.7Ghz Xeon CPUs (32 bit.) 4GB of RAM. Shows as 8 CPUs with hyper
> threading turned on. 4x 36GB SCSI disks with the hardware RAID controller
> (right now setup to look like a single 64GB disk.)
>
> It's running an older rev of CentOS right now, but it will run Solaris x86
> with boot drivers available from HPQ (required for the RAID array.)
>
> Has integrated ILO and a PCI slot with a dual gigabit ethernet NIC.
>
> I have one 120V power cable for it; it does have both power supplies and 2x
> AC inputs, but runs fine off of one. This system uses the
>
IEC320-C20<https://www.google.com/search?q=IEC320-C20&client=safari&rls=en&tb
>
m=isch&imgil=1V87taRYCkRB9M%253A%253Bhttps%253A%252F%252Fencrypted-tbn3.gstat
>
ic.com%252Fimages%253Fq%253Dtbn%253AANd9GcTOM3CbBef-FEDZlVT6Dt_qD5HELfBpdGIPK
>
2HG2gQ9SAszTOyKBA%253B390%253B292%253BK3ziPgGRNBv9yM%253Bhttp%25253A%25252F%2
>
5252Fwww.automation-drive.com%25252Fpower-cord-c20&source=iu&usg=__fsDKRf4iJD
>
MEM45kdj55QYXGUnQ%3D&sa=X&ei=QcAcU-y4OMeGyQGBy4DQCg&ved=0CFUQ9QEwAg&biw=1920&
>
bih=1138#facrc=_&imgdii=_&imgrc=1V87taRYCkRB9M%253A%3BK3ziPgGRNBv9yM%3Bhttp%2
>
53A%252F%252Fwww.automation-drive.com%252FEX%252F05-15-01%252Fc-20%25252520to
>
%25252520c-19.JPG%3Bhttp%253A%252F%252Fwww.automation-drive.com%252Fpower-cor
> d-c20%3B390%3B292>
> style
> cables.
>
> HP's spec PDF:
> http://h18000.www1.hp.com/products/quickspecs/11372_ca/11372_ca.PDF
>
> --
> -Jon
> Jonathan Katz, Indianapolis, IN.
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue