[rescue] Looking for small AT power supply

[Bill Bradford]

On Thu, May 29, 2014 at 10:40:13PM -0400, Mark G Thomas wrote:
>> Link to current Retro 1 offering:
>> http://www.brielcomputers.com/wordpress/?cat=17
>> Any suggestions for a small AT PS would be appreciated.
>I just dug out the schematic for my early edition Replica-1. As far
>as I can tell, all you need is +5VDC, unless you are using the +/-12V
>for something connected to it, such as some older parallel ASCII keyboards
>needed -12V. I suggest just ordering a 5V 1A regulated wall wart from
>Jameco if you don't already have one in a junk box, and splice it onto
>an AT PS pigtail if you don't want to solder wires onto the board.
>Mark

Found the pictures from when I built mine:

https://www.flickr.com/photos/mrbill/sets/1031279/

That was a *fun* project.

Bill

-- 
Bill Bradford
Houston, Texas USA