[rescue] Cable testers

[Mouse]

>> I'm curious: does happen to anyone know what property testers
>> capable of detecting split pairs are actually testing for?
> In the simplest terms, a conductor goes to the wrong pin.  A common
> example I've seen made by the unaware or inattentive:  Solid-green
> and solid-blue, or green/white and blue/white, accidentally swapped.

Then perhaps I misunderstood.  I took "split pairs" to be a cable that
is correctly wired as far as DC tests go but which, for example, puts
one pair on green and white/blue and another on blue and white/green.
That is, pairs for signaling purposes do not match up with which wires
are twisted together.

As a simple example of one, a friend of mine wired up some cables
thinking the pairs were pins 1/2, 3/4, 5/6, and 7/8 on the 8P8C,
instead of the actual 1/2, 4/5, 3/6, and 7/8.  His runs were fairly
short, and they worked at 10Mb, but when he switched to 100Mb they
stopped working, to his great puzzlement until he learnt the pairing.

> (Especially on some cables where you need to have the color vision of
> Vincent van Gogh to tell green/white and blue/white apart.)

I usually deal with that by figuring green/white is the one twisted
with the solid green wire and blue/white is the one twisted with blue.
(In low light I can have trouble telling green from blue even on the
solid wires, but that's a separate issue.)

And I've seen some cables where all the non-solid-colour wires are
solid white and you _have_ to tell them apart by looking at which wire
they're paired with.

/~\ The ASCII				  Mouse
\ / Ribbon Campaign
 X  Against HTML		mouse at rodents-montreal.org
/ \ Email!	     7D C8 61 52 5D E7 2D 39  4E F1 31 3E E8 B3 27 4B