[rescue] Subject: Re: Sun SparcStation 20

Tue Jun 21 16:18:17 CDT 2016

I cleaned and recleaned the j0201 ram slot and it not works. Simm is not
detected with this socket and I will have to redo all the solder of this
socket.

I pit aside this machine and started yo make my Enterprise 450 machine
functional. It's a dual UltraSPARC 2 400mhz with 1GB ram and I will use it
as a workstation. I have installed OpenBSD 5.9 on it too but xfree86 server
seem to not load with the PCI Raptor gfx. Xinit give me a connection
refused error. Not able to load a desktop.

Thank for tips for the ss20 guys :-)

Eric
Le 2016-06-21 3:51 PM, "Chase Rayfield" <cusbrar2 at yahoo.com> a C)crit :

Just be aware that OpenBSD doesn't support SMP on 32bit Sparc (yet maybe
someday if someone is feeling adventurous!)
NetBSD does support SMP on this hardware as does Linux although you'll have
a
hard time building kernels small enough to boot above about Linux 3.4ish. It
might be possible to get LTO working on Sparc kernel builds to reduce the
size
to manageable levels again but I don't think anyone has tried yet. NetBSD
also
tends to have better graphics support due to macallan's efforts.

When I have it up gh0stwriter.net/gentoo/ has linux userland stages that
sort
of work. Portage crashes with a timer overflow on my SS20 with dual SM81s.

Chase

    On Tuesday, June 21, 2016 1:00 PM, "rescue-request at sunhelp.org"
<rescue-request at sunhelp.org> wrote:

 Send rescue mailing list submissions to
B B B  rescue at sunhelp.org

To subscribe or unsubscribe via the World Wide Web, visit
B B B  http://www.sunhelp.org/mailman/listinfo/rescue
or, via email, send a message with subject or body 'help' to
B B B  rescue-request at sunhelp.org

You can reach the person managing the list at
B B B  rescue-owner at sunhelp.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of rescue digest..."

Today's Topics:

B  1. Sun SparcStation 20 (?ric Bertrand)
B  2. Re: Sun SparcStation 20 (Richard)
B  3. Re: Sun SparcStation 20 (?ric Bertrand)

----------------------------------------------------------------------

Message: 1
Date: Mon, 20 Jun 2016 19:02:47 -0400
From: ?ric Bertrand <eric.ricomac at gmail.com>
To: The Rescue List <rescue at sunhelp.org>
Subject: [rescue] Sun SparcStation 20
Message-ID:
B B B  <CAK+X7a4JPh8jZhL4_AGfr0F+9906N0vfkxwg4Vi=Z_ZwUpGL5A at mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"

Hi,

I got a Sparcstation 20 with 256MB and ZX frame buffer. It booted fairly
well
Debian weezy but I'm looking for a up to date OS to put on it. OpenBSD
support
Sparc 32 in the last release and I started to install it. I got some memory
errors and finally desktop is not loading at all. I had to put diag-switch
to
true and start self test. J0201 have a defect dimm. Replace, same thing.
Switch the j0201 on j0203 to isolate j0201 socket. J0203 is ok. Replace the
dimm at his place, start the machine and got black screen and compose on.

The service manuel tells me that the j0201 dimm is bad and the diag-switch
test-all too, I think the dimm
socket is bad because the socket seem cracked. This could be dry plastic
issue
due to aging.

Anyway, it is a possibility to align ram to dimm 01 instead of dimm 00?

------------------------------

Message: 2
Date: Tue, 21 Jun 2016 11:25:53 +1000
From: Richard <ejb at trick-1.net>
To: rescue at sunhelp.org
Subject: Re: [rescue] Sun SparcStation 20
Message-ID:
B B B  <1466472353.3351162.643567569.1D46CF7F at webmail.messagingengine.com>
Content-Type: text/plain; charset="UTF-8"

Hi Eric

Sweet machine.

Might be age related build up of gunk/oxidation. Suggest that you clean
the DIMM slot and the pins on the DIMM with some spray electrical
cleaner (no idea if thats safe or recommended but it worked for me) and
then replace. I had a similar issue which I posted about only a week or
so back. Machine is working a treat now and the module in question now
passes.

Then again it could be bad DIMMM in which case replacement is probably
on the cards.

Richard

On Tue, 21 Jun 2016, at 09:02 AM, CB B B  ric Bertrand wrote:
> Hi,
>
> I got a Sparcstation 20 with 256MB and ZX frame buffer. It booted fairly
> well
> Debian weezy but I'm looking for a up to date OS to put on it. OpenBSD
> support
> Sparc 32 in the last release and I started to install it. I got some
> memory
> errors and finally desktop is not loading at all. I had to put
> diag-switch
> to
> true and start self test. J0201 have a defect dimm. Replace, same thing.
> Switch the j0201 on j0203 to isolate j0201 socket. J0203 is ok. Replace
> the
> dimm at his place, start the machine and got black screen and compose on.
>
> The service manuel tells me that the j0201 dimm is bad and the
> diag-switch
> test-all too, I think the dimm
> socket is bad because the socket seem cracked. This could be dry plastic
> issue
> due to aging.
>
> Anyway, it is a possibility to align ram to dimm 01 instead of dimm 00?
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue

------------------------------

Message: 3
Date: Mon, 20 Jun 2016 21:43:02 -0400
From: ?ric Bertrand <eric.ricomac at gmail.com>
To: The Rescue List <rescue at sunhelp.org>
Subject: Re: [rescue] Sun SparcStation 20
Message-ID:
B B B  <CAK+X7a4q+jJhB73faf6LEUGKR14Yz1j1wDY3qoa=180GEi0ovA at mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"

Thanks Richard for your follow up. I will clean the dimm slot with
electronic 99% alcool because and will retest ram again.

Contact clean contain petrol solvent and it not the best for cleaning
mainboard sockets. It's more recommended for cleaningB  connectors.

Yesterday was a hot evening and this not helped me to diagnose my
SPARCstation. I'll do a follow up here after cleaning.

But my question about memory slot configuration with openboot remain
unanswered. It is possible to setup dimm 01to be the first simm to align
the ram?
Le 2016-06-20 9:32 PM, "Richard" <ejb at trick-1.net> a C)crit :

> Hi Eric
>
> Sweet machine.
>
> Might be age related build up of gunk/oxidation. Suggest that you clean
> the DIMM slot and the pins on the DIMM with some spray electrical
> cleaner (no idea if thats safe or recommended but it worked for me) and
> then replace. I had a similar issue which I posted about only a week or
> so back. Machine is working a treat now and the module in question now
> passes.
>
> Then again it could be bad DIMMM in which case replacement is probably
> on the cards.
>
> Richard
>
> On Tue, 21 Jun 2016, at 09:02 AM, CB  B  ric Bertrand wrote:
> > Hi,
> >
> > I got a Sparcstation 20 with 256MB and ZX frame buffer. It booted fairly
> > well
> > Debian weezy but I'm looking for a up to date OS to put on it. OpenBSD
> > support
> > Sparc 32 in the last release and I started to install it. I got some
> > memory
> > errors and finally desktop is not loading at all. I had to put
> > diag-switch
> > to
> > true and start self test. J0201 have a defect dimm. Replace, same thing.
> > Switch the j0201 on j0203 to isolate j0201 socket. J0203 is ok. Replace
> > the
> > dimm at his place, start the machine and got black screen and compose
on.
> >
> > The service manuel tells me that the j0201 dimm is bad and the
> > diag-switch
> > test-all too, I think the dimm
> > socket is bad because the socket seem cracked. This could be dry plastic
> > issue
> > due to aging.
> >
> > Anyway, it is a possibility to align ram to dimm 01 instead of dimm 00?
> > _______________________________________________
> > rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue

------------------------------

Subject: Digest Footer

_______________________________________________
rescue maillistB  -B  rescue at sunhelp.org
http://www.sunhelp.org/mailman/listinfo/rescue

------------------------------

End of rescue Digest, Vol 163, Issue 19
***************************************
_______________________________________________
rescue list - http://www.sunhelp.org/mailman/listinfo/rescue