[rescue] Service mode access on SPARC Enterprise M3000

[Larkin Nickle]

XSCF> ./standalone_flashup 00:E0:0C:00:00:FD 192.168.0.105 192.168.0.1 
255.255.255.0 192.168.0.100 IKXCP1124.tar.gz -u anonymous -p blahblah
eth0: PHY is Intel LXT972A (1378e2)
eth0      Link encap:Ethernet  HWaddr 00:E0:0C:00:00:FD
           inet addr:192.168.0.105  Bcast:192.168.0.255  Mask:255.255.255.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:9 errors:0 dropped:0 overruns:0 frame:0
           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:2517 (2.4 KiB)  TX bytes:0 (0.0 B)
           Base address:0xe000

lo        Link encap:Local Loopback
           inet addr:127.0.0.1  Mask:255.0.0.0
           UP LOOPBACK RUNNING  MTU:16436  Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use 
Iface
192.168.0.0     *               255.255.255.0   U     0      0        0 eth0
default         192.168.0.1     0.0.0.0         UG    0      0        0 eth0
network setting is OK ?yes
network setting is OK ?y
NAND driver loading
Using /scf/modules/drvnand.ko
erace all NAND devices
         erase /dev/mtd0...
         erase /dev/mtd1...
         erase /dev/mtd2...
         erase /dev/mtd3...
         erase /dev/mtd4...
         erase /dev/mtd5...
         erase /dev/mtd6...
         erase /dev/mtd7...
         erase /dev/mtd8...
         erase /dev/mtd9...
         erase /dev/mtd10...
         erase /dev/mtd11...
         erase /dev/mtd12...
         erase /dev/mtd13...
mounting NAND decices
         /hcp0/linux...
         /hcp0/scfprog...
         /hcp0/gendata...
         /hcp0/remcscm...
         /hcpcommon/setup...
         /hcpcommon/obp...
         /hcpcommon/tmp...
         /hcp1/linux...
         /hcp1/scfprog...
         /hcp1/gendata...
         /hcp1/remcscm...
         /hcpcommon/var...
         /hcpcommon/scflog1...
         /hcpcommon/scflog2...
ftp server: 192.168.0.100
ftp server name OK ?y
-rwxr-xr-x    1 root     root     47473519 Jan  1 14:10 
/tmp/IKXCP1124.tar.gz
-rw-rw-rw- 0/0      2048 2018-07-06 04:38:16 hcpinfo_0001_1124
-rw-rw-rw- 0/0   1455293 2016-01-29 01:37:39 kernel_0001_01120001.gz
-rw-rw-rw- 0/0   5580016 2018-07-06 01:55:25 root_0001_01120004.gz
-rw-rw-rw- 0/0     77579 2011-02-04 01:13:27 uboot_0001_01100001.gz
-rw-rw-rw- 0/0  20784568 2018-07-06 01:55:55 linux_0001_01120004.gz
-rw-rw-rw- 0/0  15699664 2018-07-06 01:56:20 scfprog_0001_01120004.gz
-rw-rw-rw- 0/0   3783238 2012-10-25 10:18:47 gendata_0001_01110004.gz
-rw-rw-rw- 0/0    523514 2015-07-02 07:36:25 remcscm_0001_01120000.gz
-rw-rw-rw- 0/0    610111 2012-08-30 13:52:13 obp_0001_02320000.gz
-rw-rw-rw- 0/0        93 2018-07-06 04:38:32 sign_0001_1124
XCP archive file is OK ?y
         /hcp0/linux:    linux
extracting XCP:linux_0001_01120004.gz archive start
linux_0001_01120004.gz
extracting XCP:linux_0001_01120004.gz archive end
         /hcp0/scfprog:  scfprog
extracting XCP:scfprog_0001_01120004.gz archive start
scfprog_0001_01120004.gz
extracting XCP:scfprog_0001_01120004.gz archive end

It now appears to be flashing!