[rescue] Service mode access on SPARC Enterprise M3000

[Larkin Nickle]

No problem! I hope itbll prove useful for you and others.

Larkin

> On Dec 17, 2021, at 20:19, Ethan Hawke <ehawk at ember.systems> wrote:
>
> o;?Very nice work!
>
>
> I have been adverse to M series servers for exactly these reasons, but this
adds some reassurance that they are usable/recoverable without a service
contract.
>
> This will be a useful resource in future, thanks for sticking with it.
>
>
> Ethan
>
>> On 12/18/21 07:30, Larkin Nickle wrote:
>> login: default
>> Change the panel mode switch to Locked and press return...
>> Leave it in that position for at least 5 seconds.B  Change the panel mode
switch to Service, and press return...
>> XSCF> showstatus
>> No failures found in System Initialization.
>> XSCF> poweron -y -a
>> DomainIDs to power on:00
>> Continue? [y|n] :y
>> 00 :Powering on
>>
>> *Note*
>> B This command only issues the instruction to power-on.
>> B The result of the instruction can be checked by the "showlogs power".
>> XSCF> console
>> Invalid parameter.
>> usage : console -d domain_id [[-q]{-y|-n}] [-f|-r] [-s escapeChar]
>> B B B B B B B  console -h
>> XSCF> console -d 00
>>
>> Console contents may be logged.
>> Connect to DomainID 0?[y|n] :y
>> POST Sequence 08 Memory
>> POST Sequence 09 Raw UE In Cache
>> POST Sequence 0A Floating Point Unit
>> POST Sequence 0B SC
>> POST Sequence 0C Cacheable Instruction
>> POST Sequence 0D Softint
>> POST Sequence 0E CPU Cross Call
>> POST Sequence 0F CMU-CH
>> POST Sequence 10 PCI-CH
>> POST Sequence 11 Master Device
>> POST Sequence 12 DSCP
>> POST Sequence 13 SC Check Before STICK Diag
>> POST Sequence 14 STICK Stop
>> POST Sequence 15 STICK Start
>> POST Sequence 16 Error CPU Check
>> POST Sequence 17 System Configuration
>> POST Sequence 18 System Status Check
>> POST Sequence 19 System Status Check After Sync
>> POST Sequence 1A OpenBoot Start...
>> POST Sequence Complete.
>> ChassisSerialNumber [redacted]
>>
>> SPARC Enterprise M3000 Server, using Domain console
>> Copyright (c) 1998, 2012, Oracle and/or its affiliates. All rights
reserved.
>> Copyright (c) 2012, Oracle and/or its affiliates and Fujitsu Limited. All
rights reserved.
>> OpenBoot 4.33.5.d, 16384 MB memory installed, Serial #10036154.
>> Ethernet address 0:b:5d:e2:23:ba, Host ID: 809923ba.
>>
>>
>>
>> {0} ok
>>
>> YAY! My system appears to be turning on now after rearranging the memory.
:)
>> _______________________________________________
>> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue