[rescue] NVRAM for Blade 100/150

[Peter Stokes]

Hi Alex

M48T58 work in every application I have tried and still available from the
usual sources.

Peter

Sent from my iPad

> On 14 Jan 2021, at 16:34, Alexander Jacocks <jjacocks at gmail.com> wrote:
>
> o;?Peter,
>
> What alternate M48T part have you found that works on OBP 3.x systems? I
> wasnbt aware that there was anything available, new.
>
> Thanks!
> - Alex
>
>> On Thu, Jan 14, 2021 at 06:28 Peter Stokes <peter at ashlyn.co.uk> wrote:
>>
>> Hi All
>>
>> Anyone have a suggestion for which NVRAM, that is actually available to
>> buy,
>> works in the Blade 100?
>>
>> The original M48T59 has been NLA for a long time now and the DS1553 I have
>> been using is also now NLA. For the OBP3.X systems you can use an
>> alternative
>> M48T part, but I have not found one to use in the OBP 4.X systems such as
>> the
>> Blade 100.
>>
>> As anyone who has played with these parts, using the wrong NVRAM gives an
>> error on boot of
>>
>> "(Can't load tod module) Program terminated"
>>
>> Thanks
>> _______________________________________________
>> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue