[rescue] New to me PDP-11/23+

Steve Hatle steve.hatle at gmail.com
Sun Oct 16 15:24:34 EDT 2022


Would this be a good option to hang some more terminals off this guy? Or 
- if anyone here has another solution they would part with, I'd rather 
keep my money in the family...

https://www.ebay.com/itm/185614924594

Steve

> Steve Hatle <mailto:steve.hatle at gmail.com>
> October 12, 2022 at 9:59 AM
> I was coming to the same conclusion that this could/should be 
> considered an 11/73, since the KDJ11-B always seems to referred to as 
> the board in an 11/73. Totally likely that it was upgraded in the 
> "original" 11/23+ chassis some time in the past.
>
> I will pull out one of the cards for the laser cutter and get pics up 
> soon. Since I'll be in there, I'll take photos of the Zip interface 
> card as well.
>
>
> Dave McGuire <mailto:mcguire at neurotica.com>
> October 11, 2022 at 10:56 PM
> On 10/11/22 13:35, John Hudak wrote:
>> Thanks for the clarification Dave.B  About the bulkhead, I was not 
>> referring to the on-board connectors on the KDJ11-B. When the OP 
>> mentioned 'bulkhead' I thought he meant the circuit board that 
>> contains DB9, DB25, etc. which is usually bolted to the chassis.
>
>   Ah, gotcha.  In DEC parlance, that's the "cabinet kit".  What 
> probably happened is that it was originally an 11/23, and was upgraded 
> in-chassis to an 11/73, which uses a (slightly) different cabinet kit.
>
>> The link I posted described the connections from the on-board SLU 
>> connector to the bulkhead connector.B  DEC had a number of bulkhead 
>> configurations on their machines.B  In any case, I re-read the OPs 
>> post and realized his system does not have the bulkhead connector, on 
>> the two 10-pin Berg/IDC connectors on board.
>> To clarify things, the link I posted:
>> https://gunkies.org/wiki/DEC_asynchronous_serial_line_pinout#10_pin_header 
>> <https://gunkies.org/wiki/DEC_asynchronous_serial_line_pinout#10_pin_header> 
>>
>> describes the pinouts for the 10-pin Berg connector.
>
>   All understood.  That's also a good reference.
>
>             -Dave
>
> John Hudak <mailto:jjhudak at gmail.com>
> October 11, 2022 at 12:35 PM
> Thanks for the clarification Dave.  About the bulkhead, I was not 
> referring to the on-board connectors on the KDJ11-B. When the OP 
> mentioned 'bulkhead' I thought he meant the circuit board that 
> contains DB9, DB25, etc. which is usually bolted to the chassis. The 
> link I posted described the connections from the on-board SLU 
> connector to the bulkhead connector.  DEC had a number of bulkhead 
> configurations on their machines.  In any case, I re-read the OPs post 
> and realized his system does not have the bulkhead connector, on the 
> two 10-pin Berg/IDC connectors on board.
> To clarify things, the link I posted:
> https://gunkies.org/wiki/DEC_asynchronous_serial_line_pinout#10_pin_header
> describes the pinouts for the 10-pin Berg connector.
>
> John
>
>
>
>
>
>
> _______________________________________________
> rescue list - http://sunhelp.org/mailman/listinfo/rescue_sunhelp.org
> Dave McGuire <mailto:mcguire at neurotica.com>
> October 11, 2022 at 8:27 AM
>   Just expanding on a few points below.
>
> On 10/11/22 00:48, John Hudak wrote:
>> A nice system - Congrats.B  This should keep you entertained for hours.
>> The bulkheads for console SLU differed according to what the machine 
>> was (Qbus, Unibus) and they varied within the backplane family.
>
>   Steve said he has a KDJ11-B processor board.  This processor has two 
> onboard SLUs which use the 10-pin connectors, not the 40-pins.
>
>> I think you will need to know the disk type emulation the cpu is 
>> expecting to boot from.B  This info is contained in the boot proms 
>> and configured via the onboard jumpers.
>
>   There's virtually no chance of it being anything other than MSCP. 
> Several companies made Qbus SCSI host adapters; all of them (or nearly 
> so) implement MSCP.
>
>> Not sure how to get the images onto the zip drive.
>
>   dd
>
>> To run BSD 2.x requires separate I&D space and the usual upgrade was 
>> to exchange the 11/23 cpu board for a 11/73 board.
>
>   Not quite.  2.11BSD, the last release, is the first release to 
> require split I/D space.  2.10BSD and prior will run on the 11/23.
>
>             -Dave
>
> John Hudak <mailto:jjhudak at gmail.com>
> October 10, 2022 at 11:48 PM
> A nice system - Congrats.  This should keep you entertained for hours.
> The bulkheads for console SLU differed according to what the machine 
> was (Qbus, Unibus) and they varied within the backplane family.
> Without having my notes in front of me, the information on this 
> wikipedia page is very helpful.  From what I can remember, this looks 
> to be correct:
> https://gunkies.org/wiki/DEC_asynchronous_serial_line_pinout
> The pinouts on the various bulkheads show what pins on SLU 
> connector/CPU board to connect to.
>
> Back in the day, I designed and built my own SLU interface/bulkheads 
> for our lab machines. If I can find my notes, I'll update the info.
> If you haven't already, you should check out bitsavers for some very 
> useful documentation on the KDJ11-B. Specifically the KDJ11-B CPU 
> Module Users Guide EK-KDJ1B-UG-001
> and
> KDJ11-B CPU system Maintenance EK-247AA-MG-001
>
> Useful information on how to configure the jumpers on the board, and 
> set the baud rate for the SLU.  The joys of ODT are well explained in 
> the second manual.  The User Guide does a good overview but the System 
> Maint manual has more detail
>
> You can configure the CPU board to use the onboard SLU as the console 
> or another asynchronous serial card such as the DLV11-J. Not sure what 
> config you have. The manual for the DLV11-J is also on bitsavers.
>
> Software - I can't help much here as my machines use RL02 and I have 
> actual packs for RT11 and RSX11.  OS's can be loaded using SIMH in at 
> least a couple of ways.  There is a TU-58 emulator via a serial line 
> interface.  As you mentioned, you need to get the SLU working to use 
> it.  IIRC, there are RT and RSX-11M versions (documents and compressed 
> images , RL01 format I think). I think you will need to know the disk 
> type emulation the cpu is expecting to boot from.  This info is 
> contained in the boot proms and configured via the onboard jumpers.
> Not sure how to get the images onto the zip drive.
> IIRC, the 11/23 could only run UNIX v5, V6.  To run BSD 2.x requires 
> separate I&D space and the usual upgrade was to exchange the 11/23 cpu 
> board for a 11/73 board.
> Good luck
> J
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> rescue list - http://sunhelp.org/mailman/listinfo/rescue_sunhelp.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sunhelp.org/pipermail/rescue_sunhelp.org/attachments/20221016/cdff4a5a/attachment.html>


More information about the rescue mailing list