[rescue] Dead Cyclades Alterpath ACS16

Michael Dombrowski ab1244 at yahoo.com
Fri Nov 24 09:40:08 EST 2023


I snagged a Cyclades Alterpath ACS16 for cheap off ebay... On first boot, I got a self-test screen, but since then, I am just locked into a boot loop, and the self-test screen does not reappear. The following message loops endlessly:
loaded at:     00002120 00E8D45C
relocated to:  00400020 0128B35C
board data at: 01289120 0128935C
relocated to:  00405240 0040547C
zimage at:     00406444 00546863
initrd at:     00547000 012883D0
avail ram:     0128C000 08000000

Linux/PPC load: root=/dev/ram rw
Uncompressing Linux...done.

I found what looks to be a flash recovery process, but it requires getting that self-test process to reappear:
https://theregime.wordpress.com/2008/03/24/avocent-acs-repair/
Anyone know how to coax these machines back into functioning? I removed the dead NVRAM battery just to see if that could coax it back into functioning, but no dice. There is onboard flash, as well as a CF card. If I pull the CF card, I get no output at all from the serial console, so I wonder if the onboard flash is just the bootloader to load from the compactflash, which brings me to my second question: anyone have one of these and the ability to image the compactflash card?
thanksmike

My first boot:

Booting from Original Boot 2.0.7 (Apr/21/04)
Cyclades Corporation

Testing RAM .............................. SKIPPED
Memory detected: 131072 Kbytes
Testing FLASH ............................ OK
Flash detected: 256 Kbytes
Testing Flash [Configuration] ............ OK
Storage Device Detected .................. OK
IDE HD SMC128BFD6E
Size: 128 Mbytes
Testing Storage Device [Op Code] ......... SKIPPED
Interface Cards Detected ................. OK
16-UART ports detected
PCMCIA Support Detected .................. OK
Power Supply Capability .................. SINGLE
Testing Ethernet ......................... NOK
Testing Real Time Clock .................. NOK
Testing Serial Number..................... OK
ID is 5159001100004F
Hardware boot.

Entry Point = 0x00002120

loaded at: 00002120 00E8D45C
relocated to: 00400020 0128B35C
board data at: 01289120 0128935C
relocated to: 00405240 0040547C
zimage at: 00406444 00546863
initrd at: 00547000 012883D0
avail ram: 0128C000 08000000

Linux/PPC load: root=/dev/ram rw
Uncompressing Linux...done.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sunhelp.org/pipermail/rescue_sunhelp.org/attachments/20231124/bccce8c6/attachment.html>


More information about the rescue mailing list