[rescue] Dead SparcStation 1 power supply

[Dan Moisa]

I'll try to find the Digikey order, there's definitely a connector that
fits perfectly - I think it's the P1 or the auxiliary connector from an AT
power supply, don't remember having issues making it.

Let me know about your 3/80, there are quite a few patch wires running
around on both the boards I have, if those got ripped then you'd have a bad
time.
Any chance they can be overclocked?

Dan.

On Tue, Apr 16, 2024 at 7:42 AM Romain Dolbeau via rescue <
rescue at sunhelp.org> wrote:

> Le mar. 16 avr. 2024 à 16:20, Joshua D. Boyd via rescue
> <rescue at sunhelp.org> a écrit :
> > On April 16, 2024 2:15:03 AM EDT, Romain Dolbeau via rescue <
> rescue at sunhelp.org> wrote:
> > >For machines without power supply, a solution might be to power them
> > >with an ATX power supply and an adapter.
> > >I designed one to use with a 3/80 motherboard from the ATX
> > >specifications and SS2 service manual (for the pinouts). However it
> > >didn't help said 3/80 (still under very slow investigation), so I
> > >suggest a thorough triple-check before trying. It can be found here:
> > ><https://github.com/rdolbeau/SS1_ATX> I couldn't find a matching 2x6
> > >connector for the Sun side, so it's designed for a 2x7 and two pins
> > >are hanging out on the side...
> >
> > That URL gives me a 404 error. Is it perhaps a private repo?
>
> Oups it was, should be fixed now.
>
> Cordially,
>
> --
> Romain Dolbeau
>
> _______________________________________________
> rescue list - http://sunhelp.org/mailman/listinfo/rescue_sunhelp.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sunhelp.org/pipermail/rescue_sunhelp.org/attachments/20240416/31b8e171/attachment.html>