[rescue] Found an Axil 255 (SPARCstation 5 upgrade for SS1/1+/2)

[Alexander Jacocks]

Folks,

I just lucked into an Axil 255, which I had never actually heard of. There
was a post on this list back in 2002 where someone had one, but I
apparently missed it.

The machine even works, except for the (expected) IDPROM failure:

> Axil-255, No Keyboard
> ROM Rev. 2.15, 128 MB memory installed, Serial #11184826.
> Ethernet address aa:aa:aa:aa:aa:aa, Host ID: aaaaaaba.
>
>
> The IDPROM contents are invalid
>
> Boot device: /iommu/sbus/ledma at 4,8400010/le at 4,8c00000  File and args:
> Internal loopback test -- Did not receive expected loopback packet.
>
> Can't open boot device
>
> Type  help  for more information

Color me happy! I'll have to do some investigating and testing.

I'm going to guess that the original MAC address and hostid are lost, but
since I don't have any HDDs installed in it, yet, that's not a big deal.

Has anyone else either used, or still got, one of these?

- Alex

Full diag post below:
> Power-ON Reset
>
> $$$$$ WARNING: No Keyboard Detected! $$$$$
> MMU Context Table Reg Test
> MMU Context Register Test
> MMU TLB Replace Ctrl Reg Tst
> MMU Sync Fault Stat Reg Test
> MMU Sync Fault Addr Reg Test
> MMU TLB RAM NTA Pattern Test
> MMU TLB CAM NTA Pattern Test
> MMU TLB LCAM NTA Pattern Test
> IOMMU SBUS Config Regs Test
> IOMMU Control Reg Test
> IOMMU Base Address Reg Test
> IOMMU TLB Flush Entry Test
> IOMMU TLB Flush All Test
> SBus Read Timeout Test
> EBus Read Timeout Test
> D-Cache RAM NTA Test
> D-Cache TAG NTA Test
> I-Cache RAM NTA Test
> I-Cache TAG NTA Test
> Memory Address Pattern Test
> FPU Register File Test
> FPU Misaligned Reg Pair Test
> FPU Single-precision Tests
> FPU Double-precision Tests
> FPU SP Invalid CEXC Test
> FPU SP Overflow CEXC Test
> FPU SP Divide-by-0 CEXC Test
> FPU SP Inexact CEXC Test
> FPU SP Trap Priority >  Test
> FPU SP Trap Priority <  Test
> FPU DP Invalid CEXC Test
> FPU DP Overflow CEXC Test
> FPU DP Divide-by-0 CEXC Test
> FPU DP Inexact CEXC Test
> FPU DP Trap Priority >  Test
> FPU DP Trap Priority <  Test
> PROC0 Interrupt Regs Tests
> Soft Interrupts OFF Test
> Soft Interrupts ON Test
> PROC0 User Timer Test
> PROC0 Counter/Timer Test
> DMA2 E_CSR Register Test
> LANCE Address Port Tests
> LANCE Data Port Tests
> DMA2 D_CSR Register Test
> DMA2 D_ADDR Register Test
> DMA2 D_BCNT Register Test
> DMA2 D_NADDR Register Test
> ESP Registers Tests
> DMA2 P_CSR Register Test
> DMA2 P_ADDR Register Test
> DMA2 P_BCNT Register Test
> PPORT Registers Tests
> NVRAM Access Test
> TOD Registers Test
> initializing TLB
> initializing cache
>
> Allocating SRMMU Context Table
> Setting SRMMU Context Register
> Setting SRMMU Context Table Pointer Register
> Allocating SRMMU Level 1 Table
> Mapping RAM
> Mapping ROM
>
> ttya initialized
> Probing Memory Bank #0 32 Megabytes
> Probing Memory Bank #1 32 Megabytes
> Probing Memory Bank #2 32 Megabytes
> Probing Memory Bank #3 32 Megabytes
> Incorrect configuration checksum;
> Setting NVRAM parameters to default values.
> Setting diag-switch? NVRAM parameter to true
> Probing CPU FMI,MB86904
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 4,0  espdma esp sd st
SUNW,bpp audio ledma le
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 0,0  Nothing there
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 1,0  Nothing there
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 2,0  Nothing there
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 3,0  Nothing there
> screen not found.
> Can't open input device.
> Keyboard not present.  Using tty for input and output.
> Probing Memory Bank #0 32 Megabytes
> Probing Memory Bank #1 32 Megabytes
> Probing Memory Bank #2 32 Megabytes
> Probing Memory Bank #3 32 Megabytes
> Incorrect configuration checksum;
> Setting NVRAM parameters to default values.
> Setting diag-switch? NVRAM parameter to true
> Probing CPU FMI,MB86904
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 4,0  espdma esp sd st
SUNW,bpp audio ledma le
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 0,0  Nothing there
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 1,0  Nothing there
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 2,0  Nothing there
> Probing /iommu at 0,10000000/sbus at 0,10001000 at 3,0  Nothing there
>
> Axil-255, No Keyboard
> ROM Rev. 2.15, 128 MB memory installed, Serial #11184826.
> Ethernet address aa:aa:aa:aa:aa:aa, Host ID: aaaaaaba.
>
>
> The IDPROM contents are invalid
>
> Boot device: /iommu/sbus/ledma at 4,8400010/le at 4,8c00000  File and args:
> Internal loopback test -- Did not receive expected loopback packet.
>
> Can't open boot device
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sunhelp.org/pipermail/rescue_sunhelp.org/attachments/20240718/d46e37d1/attachment.html>