<html><head></head><body><div class="ydp6aaf6340yahoo-style-wrap" style="font-family:Helvetica Neue, Helvetica, Arial, sans-serif;font-size:13px;"><div></div>
<div dir="ltr" data-setdir="false">HI CJ,</div><div dir="ltr" data-setdir="false">I've started going through the caps and pulling/replacing. Rob replied to my post on VCF so I'm using his post series as a guide of which caps to attack first:</div><div dir="ltr" data-setdir="false"><a href="https://robs-old-computers.com/2017/09/17/decstation-5000-model-240-psu-failing-under-moderate-load/" rel="nofollow" target="_blank" class="">https://robs-old-computers.com/2017/09/17/decstation-5000-model-240-psu-failing-under-moderate-load/</a></div><div><br></div><div dir="ltr" data-setdir="false">My plan is serial re-capping until I've replaced them all or have a working power supply. I did buy a LCR meter and so far the ESR is okay for the caps I have pulled. I also have a proper desoldering gun coming. Both fuses are intact.</div><div dir="ltr" data-setdir="false">I'm trying the temporary set up as I'm a.) inpatient to use the machine and b.) worried that my fix may not work, or may only work temporarily. If I get the original power supply working I'll try and figure out what's need to get a replacement working and put it out in the world.</div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false">thanks</div><div dir="ltr" data-setdir="false">mike<br></div><div dir="ltr" data-setdir="false"><br></div><div dir="ltr" data-setdir="false"><br></div><div><br></div>
</div><div id="ydp138ab915yahoo_quoted_7352454728" class="ydp138ab915yahoo_quoted">
<div style="font-family:'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:13px;color:#26282a;">
<div>
On Friday, May 31, 2024 at 07:24:50 PM CDT, CJ Reha via rescue <rescue@sunhelp.org> wrote:
</div>
<div><br></div>
<div><br></div>
<div><div id="ydp138ab915yiv7641201662"><div><div dir="ltr"><div>Hi Mike,</div><div><br clear="none"></div><div>Though I unfortunately can't give advice on the wiring of new power supplies, I can potentially be useful in bringing back the original. Much like basically any other switcher from the 80s or 90s, those supplies suffer from the output capacitors leaking. Even if there doesn't appear to be any leakage, pull the caps anyway - in my experience many supplies will have little pools of electrolyte under each cap, or the solder will sizzle and smell like fish even if it looks OK from the outside. Sometimes it's an oily "film" not easily seen unless you're really looking for it. I saw that in your VCFed thread another gentleman posted about his machine with the same problem, and he had a bunch of caps leaking on both the main board and the auxiliary control board...so it's likely your supply has the same ailment. Do check to make sure the fuse is intact - if not, there may be more serious issues afoot - otherwise, I think a simple recap may get you back on the road so to speak. What have you done on the supply to this point?</div><div><br clear="none"></div><div>Regards,</div><div>CJ<br clear="none"></div></div><br clear="none"><div class="ydp138ab915yiv7641201662gmail_quote"><div id="ydp138ab915yiv7641201662yqt38282" class="ydp138ab915yiv7641201662yqt0224863054"><div dir="ltr" class="ydp138ab915yiv7641201662gmail_attr">On Fri, May 31, 2024 at 7:54 PM Michael Dombrowski via rescue <<a shape="rect" href="mailto:rescue@sunhelp.org" rel="nofollow" target="_blank">rescue@sunhelp.org</a>> wrote:<br clear="none"></div><blockquote style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex;" class="ydp138ab915yiv7641201662gmail_quote"><div><div style="font-family:Helvetica Neue, Helvetica, Arial, sans-serif;font-size:13px;"><div dir="ltr">As I've mentioned on this list, I recently picked up a Decstation 5000/200 and was mid-way through Ultrix install when the system powered off and wouldn't come back on. I opened up the H7878A power supply, but don't see any obvious faults. I'm slowly working through it, but I don't have any experience repairing switching power supplies, so this will likely take some time.</div><div dir="ltr"><br clear="none"></div><div dir="ltr">As a temporary measure, I ordered a beefy 5v power supply and a -12/+12v buck boost converter. Unfortunately, I'm not able to boot. The power rails all are steady, and thermal imaging does not reveal any suspiciously hot areas. There are two other connectors from the power supply to the logic board: warning and POK. I've tried various combinations tying these to ground or +5v without success. Does anyone know the expected behavior of these circuits? I can find references for older Vax-en, but not for the Decstation. <br clear="none"></div><div dir="ltr"><br clear="none"></div><div dir="ltr">thanks</div><div dir="ltr">mike<br clear="none"></div></div></div>_______________________________________________<br clear="none">
rescue list - <a shape="rect" href="http://sunhelp.org/mailman/listinfo/rescue_sunhelp.org" rel="nofollow" target="_blank">http://sunhelp.org/mailman/listinfo/rescue_sunhelp.org</a><br clear="none">
</blockquote></div></div>
</div></div><div class="ydp138ab915yqt0224863054" id="ydp138ab915yqt08252">_______________________________________________<br clear="none">rescue list - <a shape="rect" href="http://sunhelp.org/mailman/listinfo/rescue_sunhelp.org" rel="nofollow" target="_blank">http://sunhelp.org/mailman/listinfo/rescue_sunhelp.org</a><br clear="none"></div></div>
</div>
</div></body></html>