<div dir="ltr">Hi folks!<div><br></div><div>I've been working on a replica Sun 3/60 based on the online available schematics, and I finally can report some success! I have a board fully booting off network, this is what it looks like: <a href="http://www.whitebearcafe.com/img/PXL_20250521_060410660.MP.jpg">http://www.whitebearcafe.com/img/PXL_20250521_060410660.MP.jpg</a></div><div><br></div><div>I left out quite a few things because I had no confidence this was going to work; there were quite a few errors in the schematics. I ended up with:</div><div>- only implementing the min required 4mb of RAM</div><div>- left out the SCSI and Video sections</div><div>- only put in the serial controller for A/B, left out the keyboard/mouse</div><div>- TTL serial, I didn't implement full rs232 or modem support</div><div>- left out the coax ethernet entirely</div><div>- no FPU</div><div><br></div><div>Everything else is there. I can boot with a regular boot prom image, pass all the diag tests, boot off the network and load a kernel.</div><div><br></div><div>I'll upload the newest version to github and arrange some things better. If I make a new version the top of the wishlist is 4MB simms, not putting more RAM in from the start is my main regret.</div><div><br></div><div>All the components were available off Digikey or eBay, with only one PAL slightly on the rare side.</div><div><br></div><div>Dan.</div><div><br></div><div>PS: I still don't know who runs <a href="https://www.sun3arc.org/">https://www.sun3arc.org/</a> I'd love to buy them a beer or cake, that site was a lot of help. If they prefer to stay anonymous I'll donate to polar bears on behalf of the site's name or something.</div></div>