<div dir='auto'>Hello!<div dir="auto"><br></div><div dir="auto">I have two Sun Ultra 10s with the same fault, and they came to get the same fault in the same way.</div><div dir="auto"><br></div><div dir="auto">They both did the following:</div><div dir="auto"><br></div><div dir="auto">* Started to get IDProm errors</div><div dir="auto">* Used the "normal" instructions for fixing this</div><div dir="auto">* Some time later after a reboot things started to go wrong</div><div dir="auto"><br></div><div dir="auto">This sort of worked for a moment, but now when I apply power to either machine the power led stays off (most of the time) in the very rares time when the power led does turn on I can't succesfully boot the machines. Sometimes they end up booting into Solaris but they are not stable.</div><div dir="auto"><br></div><div dir="auto">For instance even dtlogin will just start and cycle on and off until ultimately the system hangs entirely. At this point pressing stop+a and resetting usually doesn't boot correctly.</div><div dir="auto"><br></div><div dir="auto">Swapping around ram/CPUs/power supplies between the two systems has no effect. Removing the AFB doesn't really seem to change anything either.</div><div dir="auto"><br></div><div dir="auto">It seems kind of unlikely that both computers have the same obscure hardware fault in the same component, I hope this is all just the IDProm fucking up.</div><div dir="auto"><br></div><div dir="auto">I tried both of the IDProm chips in my minipro reader and they seem to not really read that same each time. And writing data to the chips doesn't seem to "stick".</div><div dir="auto"><br></div><div dir="auto">Help would be very much appreciated! Thank you!&nbsp;</div><div dir="auto"><br></div><div dir="auto">- HP</div></div>