[Sunhelp] Re: new tape library

Wed Aug 2 07:59:28 CDT 2000

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01BFFC81.8064F446
Content-Type: text/plain;
	charset="iso-8859-1"

Thanks very much every one for your help. I got enough info from all of you
to get thing to work.
Regards

-----Original Message-----
From: Greg Kranz [mailto:greg.kranz at tycoelectronics.com]
Sent: Wednesday, August 02, 2000 8:18 AM
To: sunhelp at sunhelp.org
Subject: [Sunhelp] Re: new tape library

You will also need to do some work on the /kernel/drv/st.conf file,
depending on 
which tape drives are installed in the Spectra Logic 10000.  Assuming you
have 
the SONY AIT drives, you will have to add two lines that are close to the 
following:

	        "SONY    SDX-300C",     "SONY AIT",   "SONY_AIT";

	        SONY_AIT       =   1,0x34,0,0x3d639,4,0x13,0x8c,0x8c,0x8c,3;

The ";" at the end of the first line, ends the tape drive description
section of 
this file.  If you have more than one line uncommented in this section then
only 
the last line ends in a ";".  The others end in a ","

The details are outlined on the Spectralogic web site, in the 10000 
documentation.

# From: Naser Ali <Ali.Naser at irs.gov>
# To: sunhelp at sunhelp.org
# Date: Tue, 1 Aug 2000 13:34:53 -0400
# boundary="----_=_NextPart_001_01BFFBDE.D09C6E4C"
# Subject: [Sunhelp] new tape library
# Reply-To: sunhelp at sunhelp.org
# 
# This message is in MIME format. Since your mail reader does not understand
# this format, some or all of this message may not be legible.
# 
# ------_=_NextPart_001_01BFFBDE.D09C6E4C
# Content-Type: text/plain;
# 	charset="iso-8859-1"
# 
# Hello
# I have just connected a Spectra Logic 10000 to my SUN E-3000 running
# Solaris 2.6.
# Now I can see the 2 drives in the library but do not know how to access it
# from the command line.
# 
# Any pointers will be help full.
# TIA

Greg Kranz
Tyco Electronics, A Tyco International Limited Company
MS 194-09, Box 3608, Harrisburg, PA 17105
phone: (717) 810-2311       fax:(717) 810-2236
e-mail: greg.kranz at tycoelectronics.com

_______________________________________________
SunHELP maillist  -  SunHELP at sunhelp.org
http://www.sunhelp.org/mailman/listinfo/sunhelp

------_=_NextPart_001_01BFFC81.8064F446
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2650.12">
<TITLE>RE: [Sunhelp] Re: new tape library</TITLE>
</HEAD>
<BODY>

Thanks very much every one for your help. I got =
enough info from all of you to get thing to work.
 Regards

<P><FONT SIZE=3D2>-----Original Message-----</FONT>
<BR><FONT SIZE=3D2>From: Greg Kranz [<A =
HREF=3D"mailto:greg.kranz at tycoelectronics.com">mailto:greg.kranz at tycoele=
ctronics.com</A>]</FONT>
<BR><FONT SIZE=3D2>Sent: Wednesday, August 02, 2000 8:18 AM</FONT>
<BR><FONT SIZE=3D2>To: sunhelp at sunhelp.org</FONT>
<BR><FONT SIZE=3D2>Subject: [Sunhelp] Re: new tape library</FONT>
</P>
<BR>

<P><FONT SIZE=3D2>You will also need to do some work on the =
/kernel/drv/st.conf file, depending on </FONT>
<BR><FONT SIZE=3D2>which tape drives are installed in the Spectra Logic =
10000.  Assuming you have </FONT>
<BR><FONT SIZE=3D2>the SONY AIT drives, you will have to add two lines =
that are close to the </FONT>
<BR><FONT SIZE=3D2>following:</FONT>
</P>

<P>        <FONT =
SIZE=3D2>        =
"SONY    SDX-300C",     =
"SONY AIT",   "SONY_AIT";</FONT>
<BR>        <FONT =
SIZE=3D2>        </FONT>
<BR>        <FONT =
SIZE=3D2>        =
SONY_AIT       =3D   =
1,0x34,0,0x3d639,4,0x13,0x8c,0x8c,0x8c,3;</FONT>
</P>

<P><FONT SIZE=3D2>The ";" at the end of the first line, ends =
the tape drive description section of </FONT>
<BR><FONT SIZE=3D2>this file.  If you have more than one line =
uncommented in this section then only </FONT>
<BR><FONT SIZE=3D2>the last line ends in a ";".  The =
others end in a ","</FONT>
</P>
<BR>

<P><FONT SIZE=3D2>The details are outlined on the Spectralogic web =
site, in the 10000 </FONT>
<BR><FONT SIZE=3D2>documentation.</FONT>
</P>
<BR>
<BR>
<BR>

# From: Naser Ali <Ali.Naser at irs.gov>
 # To: sunhelp at sunhelp.org
 # Date: Tue, 1 Aug 2000 13:34:53 -0400
 # =
boundary=3D"----_=3D_NextPart_001_01BFFBDE.D09C6E4C"
 # Subject: [Sunhelp] new tape library
 # Reply-To: sunhelp at sunhelp.org
 # 
 # This message is in MIME format. Since your mail =
reader does not understand
 # this format, some or all of this message may not =
be legible.
 # 
 # ------_=3D_NextPart_001_01BFFBDE.D09C6E4C
 # Content-Type: text/plain;
 #       =
charset=3D"iso-8859-1"
 # 
 # Hello
 #  I have just connected a Spectra Logic 10000 =
to my SUN E-3000 running
 # Solaris 2.6.
 # Now I can see the 2 drives in the library but do =
not know how to access it
 # from the command line.
 # 
 # Any pointers will be help full.
 # TIA

<P><FONT SIZE=3D2>Greg Kranz</FONT>
<BR><FONT SIZE=3D2>Tyco Electronics, A Tyco International Limited =
Company</FONT>
<BR><FONT SIZE=3D2>MS 194-09, Box 3608, Harrisburg, PA 17105</FONT>
<BR><FONT SIZE=3D2>phone: (717) =
810-2311       fax:(717) 810-2236</FONT>
<BR><FONT SIZE=3D2>e-mail: greg.kranz at tycoelectronics.com</FONT>
</P>
<BR>

<P><FONT =
SIZE=3D2>_______________________________________________</FONT>
<BR><FONT SIZE=3D2>SunHELP maillist  -  =
SunHELP at sunhelp.org</FONT>
<BR><FONT SIZE=3D2><A =
HREF=3D"http://www.sunhelp.org/mailman/listinfo/sunhelp" =
TARGET=3D"_blank">http://www.sunhelp.org/mailman/listinfo/sunhelp</A></F=
ONT>
</P>

</BODY>
</HTML>
------_=_NextPart_001_01BFFC81.8064F446--