[Sunhelp] Help reqd for SCSI errors !!

Rey S. Castro arcee at sun.com.ph
Fri Oct 27 02:20:11 CDT 2000 

--------------25FCCA00D434FBD4FF3375FF
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

hi,

You have to be certain on the external disk you are attaching on the
SS1000.  Are you using  ULTRASCSI disks? If so, there is a specific cable
for that device, check the information at the back of the multipack cover (
if you are using an UltraSCSI multipack).

-rey-




Shivraj Yadav CS -hyd wrote:

> Hi Friends!
> I am having a SPARC SERVER 1000 with 2 internal HDD & around 4 external
> HDD, one of 'em being kept in a shoe-box.
> Nowadays while booting also otherwise when the system is functioning, i
> keep on getting the following messgaes on the console.....
>
> WARNING: /io-unit at f,e1200000/sbi at 0,0/dma at 0,81000/esp at 0,800000 (esp2):
> 1)UNIX:Target 3.0 reducing sync transfer rate
> "SCSI transport failed : reason 'time out': retrying command
> 2) "SCSI transport failed : reason 'reset':retrying command
> 3) "Connected command timeout for target 3.0 "
>
> I need help in finding out where the problem is. Is it is the HDD or the
> cable connecting to it ?????
> What's the difference in the above three messages.
> Thanks in advance .....
> SHIVRAJ
>
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp



--------------25FCCA00D434FBD4FF3375FF
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<body text="#000000" bgcolor="#FFCCCC" link="#0000FF" vlink="#FF0000" alink="#000088">
hi,
<p>You have to be certain on the external disk you are attaching on the
SS1000.  Are you using  ULTRASCSI disks? If so, there is a specific
cable for that device, check the information at the back of the multipack
cover ( if you are using an UltraSCSI multipack).
<p>-rey-
<br> 
<br> 
<br> 
<p>Shivraj Yadav CS -hyd wrote:
<blockquote TYPE=CITE>Hi Friends!
<br>I am having a SPARC SERVER 1000 with 2 internal HDD & around 4
external
<br>HDD, one of 'em being kept in a shoe-box.
<br>Nowadays while booting also otherwise when the system is functioning,
i
<br>keep on getting the following messgaes on the console.....
<p>WARNING: /io-unit at f,e1200000/sbi at 0,0/dma at 0,81000/esp at 0,800000 (esp2):
<br>1)UNIX:Target 3.0 reducing sync transfer rate
<br>"SCSI transport failed : reason 'time out': retrying command
<br>2) "SCSI transport failed : reason 'reset':retrying command
<br>3) "Connected command timeout for target 3.0 "
<p>I need help in finding out where the problem is. Is it is the HDD or
the
<br>cable connecting to it ?????
<br>What's the difference in the above three messages.
<br>Thanks in advance .....
<br>SHIVRAJ
<p>_______________________________________________
<br>SunHELP maillist  -  SunHELP at sunhelp.org
<br><a href="http://www.sunhelp.org/mailman/listinfo/sunhelp">http://www.sunhelp.org/mailman/listinfo/sunhelp</a></blockquote>

<pre></pre>
 
</body>
</html>

--------------25FCCA00D434FBD4FF3375FF--

More information about the SunHELP mailing list