[SunHELP] SBus Serial Cards

[Steve Wingate]

There shouldn't be any tricks involved. My Sparc 20 has 336MB RAM in it - 4-64's, one-32 and three 16's. I suppose it is possible that you need a higher OBP to use 64MB chips. I had no problem with 2.12 or 2.25R. It could be that the RAM isn't compatible or not installed in the right order (if they're not all 64's)


On Tue, 27 Nov 2001 08:44:36 -0800 (PST)
"Rick Hamell" <hamellr at heorot.1nova.com> wrote:

> 
> > > I've got a Sparc20 here (128MB RAM, Dual SM71s) and I'd like to get it
> > > going decently as an OpenBSD firewall.  I'd like to add another 2 network
> > > ports to it (other than the onboard le0) and also a faster async serial
> > > port so I can get higher data rates than 38.4Kbps.
> 
> 	On the same token, what is the magic trick to get a S20 to
> reconize more then 224 megs of RAM upon bootup? I've got enough 64 meg
> chips to go to 512mb, but it seems to be a waste. :(
> 
> 	Rick
> 
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp