[SunHELP] A3500 problem

[Devrim Yilmaz (Garanti Teknoloji)]

Hi friends;
I have a problem to configure A3500 Controller. I selected 1x Storedge A3500
Controller and 2 x Storedge D100 Disk Arrays to configure. And i just followed
805-4981 document. My problem is it can not find RAID devices. But i checked
two D1000s seperately, they are ok. If you have any idea or advice, i will be
glad.

Thx and regards,
dEVRim-

# --------------------------------------------------------------------
When I type probe-scs}-all at ok prompt, it says;

/pci at 6....................................
target 5
	unit 0 Device type 20 Symbios StorEDGE A3000 0205
	unit 1 Device type 20 Symbios StorEDGE A3000 0205
	unit 2 Device type 20 Symbios StorEDGE A3000 0205
	unit 3 Device type 20 Symbios StorEDGE A3000 0205
	unit 4 Device type 20 Symbios StorEDGE A3000 0205
	unit 5 Device type 20 Symbios StorEDGE A3000 0205
	unit 6 Device type 20 Symbios StorEDGE A3000 0205
	unit 7 Device type 20 Symbios StorEDGE A3000 0205


/pci at 6....................................
target 4
	unit 0 Device type 20 Symbios StorEDGE A3000 0205
	unit 1 Device type 20 Symbios StorEDGE A3000 0205
	unit 2 Device type 20 Symbios StorEDGE A3000 0205
	unit 3 Device type 20 Symbios StorEDGE A3000 0205
	unit 4 Device type 20 Symbios StorEDGE A3000 0205
	unit 5 Device type 20 Symbios StorEDGE A3000 0205
	unit 6 Device type 20 Symbios StorEDGE A3000 0205
	unit 7 Device type 20 Symbios StorEDGE A3000 0205



# --------------------------------------------------------------------
Sistem Error Messages;

krtld: [ID 469452 kern.info] NOTICE: socal: 64-bit driver module not found
There are no devices (controllers) in the system; nvutil terminated.
There are no devices (controllers) in the system.
fwutil failed!
Array Monitor initiated
/usr/lib/osa/bin/arraymon: [ID 712306 user.error] No RAID devices found to
check.
RDAC daemons initiated
rdriver: [ID 400281 kern.notice] ID[RAIDarray.rdaemon.1001] RDAC Resolution
Daemon locked in memory
smt: [ID 272566 kern.notice] smt0: nf FDDI driver is not active.
Initialization of this driver cannot be completed.

# --------------------------------------------------------------------
When i run "lad" command, it says;
"No RAID devices found."

# --------------------------------------------------------------------
When i run "hot_add" command, it says;
WARNING: set_drivers: No arrays were found that are controlled by either the
sd or the ssd driver



-----------------------------------------------------------------------------
------------------------------
Bu mesaj ve ekleri mesajda gonderildigi belirtilen kisi/kisilere ozeldir ve
gizlidir.Bu mesajin muhatabi
olmamaniza ragmen tarafiniza ulasmis olmasi halinde mesaj iceriginin gizliligi
ve bu gizlilik y|k|ml|l|g|ne
uyulmasi zorunlulugu tarafiniz icin de soz konusudur.Mesaj ve eklerinde yer
alan bilgilerin dogrulugu ve
g|ncelligi konusunda gonderenin ya da sirketimizin herhangi bir sorumlulugu
bulunmamaktadir.Sirketimiz
mesajin ve bilgilerinin size degisiklige ugrayarak veya gec ulasmasindan,
b|t|nl|g|n|n ve gizliliginin
korunamamasindan, vir|s icermesinden ve bilgisayar sisteminize verebilecegi
herhangi bir zarardan
sorumlu tutulamaz.

This message and attachments are confidential and intended solely for the
individual(s) stated in this
message.If you received this message although you are not the addressee you
are responsible to keep
confidential the message.The sender has no responsibility for the accuracy or
correctness of the
information in the message and its attachments.Our company shall have no
liability for any changes
or late receiving,loss of integrity and confidentiality,viruses and any
damages caused in
anyway to your computer system.