[SunHELP] Removing CPU and memory

[sunhelp at sunhelp.org]

Seems that is not the case on the E420R, but that is ok I'll just pop the
tops and get this documented.  
Thanks for the help.




/usr/platform/`uname -m`/sbin/prtdiag -v
System Configuration:  Sun Microsystems  sun4u Sun Enterprise 420R
(UltraSPARC-II 450MHz)
System clock frequency: 113 MHz
Memory size: 2048 Megabytes

========================= CPUs =========================

                    Run   Ecache   CPU    CPU
Brd  CPU   Module   MHz     MB    Impl.   Mask
---  ---  -------  -----  ------  ------  ----
 0     3     3      450     4.0   US-II    10.0


========================= IO Cards =========================

     Bus   Freq
Brd  Type  MHz   Slot  Name                              Model
---  ----  ----  ----  --------------------------------
----------------------
 0   PCI    33     0   SUNW,qfe-pci108e,1001             SUNW,pci-qfe

 0   PCI    33     1   network-SUNW,hme

 0   PCI    33     1   SUNW,qfe-pci108e,1001             SUNW,pci-qfe

 0   PCI    33     1   fibre-channel-pci10df,f800.10df.+

 0   PCI    33     2   SUNW,qfe-pci108e,1001             SUNW,pci-qfe

 0   PCI    33     3   scsi-glm/disk (block)             Symbios,53C875

 0   PCI    33     3   scsi-glm/disk (block)             Symbios,53C875

 0   PCI    33     3   SUNW,qfe-pci108e,1001             SUNW,pci-qfe

 0   PCI    33     4   fibre-channel-pci10df,f800.10df.+

 0   PCI    33     5   SUNW,m64B                         SUNW,370-4362


No failures found in System
===========================

========================= HW Revisions =========================

ASIC Revisions:
---------------
PCI: pci Rev 4
Cheerio: ebus Rev 1

System PROM revisions:
----------------------
  OBP 3.29.0 2000/12/20 18:40   POST 1.2.8 2000/08/22 19:50

-----Original Message-----
From: Will Mc Donald [mailto:wmcdonald at ntlworld.com]
Sent: Tuesday, November 04, 2003 2:53 PM
To: The SunHELP List
Subject: Re: [SunHELP] Removing CPU and memory


Won't prtdiag give a good deal of the info you need?

/usr/platform/`uname -i`/sbin/prtdiag -v

e.g.

System Configuration:  Sun Microsystems  sun4u Sun Enterprise 450
(UltraSPARC-II 296MHz)
System clock frequency: 99 MHz
Memory size: 1024 Megabytes
       CPU Units: Frequency Cache-Size Version
            A: MHz  MB  Impl. Mask  B: MHz  MB  Impl. Mask
            ----------  ----- ----  ----------  ----- ----
                                       296 2.0   11    2.0


========================= Memory =========================

       Interlv.  Socket   Size
Bank    Group     Name    (MB)  Status
----    -----    ------   ----  ------
  0      none      1901   256      OK
  0      none      1902   256      OK
  0      none      1903   256      OK
  0      none      1904   256      OK

======================IO Cards=========================================


           UPA Device 0x1F  PCI Bus A (clock frequency: 66 MHz)

           UPA Device 0x1F  PCI Bus B (clock frequency: 33 MHz)


           UPA Device 0x4  PCI Bus A (clock frequency: 66 MHz)

           UPA Device 0x4  PCI Bus B (clock frequency: 33 MHz)


           UPA Device 0x6  PCI Bus A (clock frequency: 66 MHz)

           UPA Device 0x6  PCI Bus B (clock frequency: 33 MHz)
               Slot 1: pf



----- Original Message -----
From: "Markham, Richard" <RLMarkham at hafeleamericas.com>
To: "'The SunHELP List'" <sunhelp at sunhelp.org>
Sent: Tuesday, November 04, 2003 7:23 PM
Subject: RE: [SunHELP] Removing CPU and memory


> Is there a way to show memory slot usage and installed memory sizes from
> command line?
>
> -----Original Message-----
> From: Richard.Skelton at infineon.com [mailto:Richard.Skelton at infineon.com]
> Sent: Tuesday, November 04, 2003 10:42 AM
> To: sunhelp at sunhelp.org
> Subject: RE: [SunHELP] Removing CPU and memory
>
>
> No
>
> -----Original Message-----
> From: sunhelp-bounces at sunhelp.org [mailto:sunhelp-bounces at sunhelp.org] On
> Behalf Of Markham, Richard
> Sent: 04 November 2003 15:32
> To: 'sunhelp at sunhelp.org'
> Subject: [SunHELP] Removing CPU and memory
>
>
> I need to pull the CPU's and memory out of a system for use in another.
> If I pull 8 of the 16 memory chips and 2 of the 3 CPU's, will I need
> to set any jumpers?
>
> E420R
> Solaris 8
>
> TIA
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
> _______________________________________________
> SunHELP maillist  -  SunHELP at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/sunhelp
_______________________________________________
SunHELP maillist  -  SunHELP at sunhelp.org
http://www.sunhelp.org/mailman/listinfo/sunhelp