[rescue] Xyplexing

[Eugene Kushnirskiy]

James,

Thank you very much for your help. Your suggestion worked.

I also wanted to thank everyone else on the list whol assisted me in getting
the Xyplex box up and running.

I had one other question. The Xyplex manual says that there is a GUI-based
management software for Xyplex terminal servers called FocalPoint. Does
anyone know where I can get it?

Regards,


Eugene

----- Original Message -----
From: "James Sharp" <jsharp at psychoses.org>
To: <rescue at sunhelp.org>
Sent: Thursday, November 08, 2001 12:11 PM
Subject: Re: [rescue] Xyplexing


> > When I telnet to the port, the connection gets established. When I press
> > "ENTER" once, I get a "#" prompt. I can not type anything (at least I do
not
> > see any text". When I press "ENTER" again, I get another "#" character
on a
> > new line. Finally, when I press "ENTER" again, I get a blank line and
> > another "#" character. At that point, the connection hangs (i.e.
pressing
> > any keys does not do anything).
>
> That's the non-echoing password prompt.  If you haven't set a password, it
> should be the default of "access".  Type that, and the console port should
> be connected, though you won't see any messages...the connection will just
> start suddenly working.
>
> You can disable passwords on that port by using the command "define port 4
> password disabled" and then rebooting the box with "init delay 0".
>
>
> _______________________________________________
> rescue maillist  -  rescue at sunhelp.org
> http://www.sunhelp.org/mailman/listinfo/rescue
>
>