[rescue] This a bad sign?
Goldarg
rescue at sunhelp.org
Thu Oct 11 01:58:42 CDT 2001
My poor SS1000 hasnt been quite happy since Sep 11th, its had to be power
cycled three times since then and rebooted with shutdown a couple other
times.
I've noticed in the boot output that I get mailed that it has a error
listed on the bottom two lines, Should I be concerned with this?
I've searched on google and not come up with anything helpfull.
I know 2.4 isnt the best version of solaris to run but I dont have a easy
upgrade at this point in time to something newer, I've started to see
problems with lockd eating up all the CPU on the poor guy since the 11th
and start to cause file locking to fail, at that point Its a have to
reboot situation.
This time I couldnt even log in over the serial console to see why web2
was missing pings and had to go the powerswitch to get it going again.
----------
Wed Oct 10 23:31:59 MST 2001
web2.azstarnet.com has rebooted and come up multiuser
**** dmesg output:
Oct 10 23:31
SunOS Release 5.4 Version Generic_101945-62 [UNIX(R) System V Release 4.0]
Copyright (c) 1983-1994, Sun Microsystems, Inc.
cpu0: BW Prescaler/XDBus Frequency=50MHz
Bootbus Semaphore held (0x5)
MXCC control register=0x5c<WI,MC,PE,CE>
SuperSPARC MCNTL register=0xc015701<TC,SE,PE,SB,IE,DE,EN>
SuperSPARC ACTION register=0x1000<MIX>
kernel contains workarounds for SuperSPARC bugs: MFAR2 1151159 PTP2
mem = 1048576K (0x40000000)
avail mem = 965914624
Ethernet address = 8:0:20:75:b8:15
root nexus = SUNW,SPARCserver-1000
sbi0 at root: csr(unit=0x 2) addr=0x 200. 0 and ecsr(unit=0x 2) addr=0x 2800. 0 and ecsr(unit=0x 2) addr=0x 2000. 0
sbi1 at root: csr(unit=0x12) addr=0x 200. 0 and ecsr(unit=0x12) addr=0x 2800. 0 and ecsr(unit=0x12) addr=0x 2000. 0
dma0 at sbi0: SBus0 slot 0 0x81000
dma2 at sbi1: SBus1 slot 0 0x81000
esp0 at dma0: SBus0 slot 0 0x80000 SBus level 3 sparc ipl 5
esp2 at dma2: SBus1 slot 0 0x80000 SBus level 3 sparc ipl 5
sd0 at esp0: target 0 lun 0
sd0 is /io-unit at f,e0200000/sbi at 0,0/dma at 0,81000/esp at 0,80000/sd at 0,0
<SUN1.05 cyl 2036 alt 2 hd 14 sec 72>
sd1 at esp0: target 1 lun 0
sd1 is /io-unit at f,e0200000/sbi at 0,0/dma at 0,81000/esp at 0,80000/sd at 1,0
<SUN1.05 cyl 2036 alt 2 hd 14 sec 72>
sd6 at esp0: target 6 lun 0
sd6 is /io-unit at f,e0200000/sbi at 0,0/dma at 0,81000/esp at 0,80000/sd at 6,0
<>
Unable to install/attach driver 'isp'
root on /io-unit at f,e0200000/sbi at 0,0/dma at 0,81000/esp at 0,80000/sd at 0,0:a fstype ufs
TI,TMS390Z550 at root: ecsr(unit=0x 0) addr=0x 1f00. 0
TI,TMS390Z550 is /cpu-unit at f,e0000000/TI,TMS390Z55 at 1,1f00000
TI,TMS390Z551 at root: ecsr(unit=0x 8) addr=0x 1f00. 0
TI,TMS390Z551 is /cpu-unit at f,e0800000/TI,TMS390Z55 at 1,1f00000
TI,TMS390Z552 at root: ecsr(unit=0x10) addr=0x 1f00. 0
TI,TMS390Z552 is /cpu-unit at f,e1000000/TI,TMS390Z55 at 1,1f00000
TI,TMS390Z553 at root: ecsr(unit=0x18) addr=0x 1f00. 0
TI,TMS390Z553 is /cpu-unit at f,e1800000/TI,TMS390Z55 at 1,1f00000
bootbus0 at root
zs0 at root: ecsr(unit=0x 0) addr=0x 200. 0 and local(cpu ?x?) addr=0x 30200. 0 sparc ipl 12
zs0 is /cpu-unit at f,e0000000/bootbus/zs at 1,200000
zs1 at root: ecsr(unit=0x 0) addr=0x 240. 0 and local(cpu ?x?) addr=0x 30240. 0 sparc ipl 12
zs1 is /cpu-unit at f,e0000000/bootbus/zs at 1,240000
bootbus1 at root
zs2 at root: ecsr(unit=0x10) addr=0x 200. 0 and local(cpu ?x?) addr=0x 30200. 0 sparc ipl 12
zs2 is /cpu-unit at f,e1000000/bootbus/zs at 1,200000
zs3 at root: ecsr(unit=0x10) addr=0x 240. 0 and local(cpu ?x?) addr=0x 30240. 0 sparc ipl 12
zs3 is /cpu-unit at f,e1000000/bootbus/zs at 1,240000
OBP-Master initialization complete - online
number of CPUs: 4
cpu1: BW Prescaler/XDBus Frequency=50MHz
Bootbus Semaphore NOT held (0x5)
MXCC control register=0x5c<WI,MC,PE,CE>
SuperSPARC MCNTL register=0xc015701<TC,SE,PE,SB,IE,DE,EN>
SuperSPARC ACTION register=0x1000<MIX>
cpu3: BW Prescaler/XDBus Frequency=50MHz
Bootbus Semaphore NOT held (0x5)
MXCC control register=0x5c<WI,MC,PE,CE>
SuperSPARC MCNTL register=0xc015701<TC,SE,PE,SB,IE,DE,EN>
SuperSPARC ACTION register=0x1000<MIX>
cpu2: BW Prescaler/XDBus Frequency=50MHz
Bootbus Semaphore held (0x5)
MXCC control register=0x5c<WI,MC,PE,CE>
SuperSPARC MCNTL register=0xc015701<TC,SE,PE,SB,IE,DE,EN>
SuperSPARC ACTION register=0x1000<MIX>
Unable to install/attach driver 'stc'
qec0 at sbi0: SBus0 slot 1 0x20000 and SBus0 slot 1 0x40000
be0 at qec0: SBus0 slot 0 0x0 and SBus0 slot 10 0x0 and SBus0 slot 20 0x0 SBus level 4 sparc ipl 7
be0 is /io-unit at f,e0200000/sbi at 0,0/qec at 1,20000/be at 0,0
qec1 at sbi0: SBus0 slot 3 0x20000 and SBus0 slot 3 0x40000
be1 at qec1: SBus0 slot 0 0x0 and SBus0 slot 10 0x0 and SBus0 slot 20 0x0 SBus level 4 sparc ipl 7
be1 is /io-unit at f,e0200000/sbi at 0,0/qec at 3,20000/be at 0,0
be0: Using Onboard Transceiver
be0: 100 Mbps Link Up
be0: Using Onboard Transceiver
be0: 100 Mbps Link Up
be0: Using Onboard Transceiver
be0: 100 Mbps Link Up
be1: Using Onboard Transceiver
be1: 100 Mbps Link Up
be1: Using Onboard Transceiver
be1: 100 Mbps Link Up
be1: Using Onboard Transceiver
be1: 100 Mbps Link Up
dump on /dev/dsk/c0t1d0s1 size 130496K
**** prtdiag output:
System Configuration: Sun Microsystems sun4d SPARCserver 1000E
System clock frequency: 50 MHz
Memory size: 1024Mb
Number of XDBuses: 1
CPU Units: Frequency Cache-Size Memory Units: Group Size
A: MHz MB B: MHz MB 0: MB 1: MB 2: MB 3: MB
--------- --------- ----- ----- ----- -----
Board0: 85 1.0 85 1.0 128 128 128 128
Board1: 85 1.0 85 1.0 128 128 128 128
======================SBus Cards=========================================
Board0: SBus clock frequency: 25 MHz
0: dma/esp(scsi) 'SUNW,500-2015'
lebuffer/le(network) 'SUNW,500-2015'
1: qec/be(network) 'SUNW,270-2450'
2: <empty>
3: qec/be(network) 'SUNW,270-2450'
Board1: SBus clock frequency: 25 MHz
0: dma/esp(scsi) 'SUNW,500-2015'
lebuffer/le(network) 'SUNW,500-2015'
1: <empty>
2: <empty>
3: <empty>
No failures found in System
===========================
Most recent AC Power Failure:
=============================
Wed Sep 12 06:00:11 2001
Analysis of most recent System Watchdog:
========================================
Log Date: Fri Jul 16 13:11:09 1999
Analysis for Board 1
--------------------
MQH0 Multiple Errors
MQH0 Client Device Error = MEM_MSTR
More information about the rescue
mailing list