[rescue] sun kbord/mouse

[Dan Williams]

On 4/20/05, Jochen Kunz <jkunz at unixag-kl.fh-kl.de> wrote:
> On Mon, 18 Apr 2005 16:35:09 -0800
> Kevin Foote <kevin.foote at gmail.com> wrote:
>
> > Also does anyone know if my sgi mtr GDM...  will accept the output
> > from this box?
> Depends. If the SGI tube has BNC inputs and you have a Sun BNC cable it
> should work. If machine and tube are 13W3 then you may get no picture.
> The problem here is a different pinout Sun <=> SGI for the 10 extra pins
> in the 13W3 connector. You should get around this with a custom cable.
> Connect the CSync signal from the Sun via an 560 Ohm resistor to the
> green signal to generate sync on green. Connect only R, G+Sync and B
> signals to the SGI monitor.
> --
>
> tsch|_,
>        Jochen
>
> Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
>
I've also used 2 13w3-->vga convertors and a vga cable, it seems to
work on most monitors I've tried.

Dan