[rescue] Sun Blade 1000

[Richard]

Hi Michael

So as far as I know there isnbt any particular voodoo.

That said I would open up (if not already done so) and double check that all
the internal power cabling is connected.
Make sure that the side case is properly put back on and fastened as these
units have a case open interlock.
Further some power supplies wonbt fire up without a load such as a hard
driveb&.

For reference here is the service manual
https://docs.oracle.com/cd/E19127-01/blade1000.ws/816-3217-10/816-3217-10.pdf
<https://docs.oracle.com/cd/E19127-01/blade1000.ws/816-3217-10/816-3217-10.pd
f>

See section 4.1. Power on Failure

If you can get it working looks like you can get up to 8G of memory in it
along with another CPU
https://shrubbery.net/~heas/sun-feh-2_1/Systems/SunBlade1000/spec.html
<https://shrubbery.net/~heas/sun-feh-2_1/Systems/SunBlade1000/spec.html>

Look forward to hearing progress on the restoration

Cheers

Richard

> On 15 Jun 2021, at 5:32 am, Michael Thompson <michael.99.thompson at gmail.com>
wrote:
>
> I just got a Sun Blade 1000 with a single 750 Mhz CPU, 4GB RAM, no disk,
> and Elite3D-m6 Series 2 graphics for free.
>
> I connected a known good and powered cord to the power supply and pressed
> the power button on the front. Nothing happens.
>
> Is the power supply bad, or is there some other magic to getting it to
> power up?
>
> --
> Michael Thompson
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue