[rescue] torque of CPU to CPU/RAM board of E4500

[Mark M]

The memory boards did.

Adding to the pile, in Blade 2000s that were configured from factory with 2
cpu's the torque driver was not included.

Perhaps that's the case in full spec machines?

-mark

On Mon, May 3, 2021 at 2:54 PM Peter Stokes <peter at ashlyn.co.uk> wrote:

> Hi
>
> Ultra 80s? They did not use torque wrenches AFAIK? (Plug in CPUs)
>
> I think you may mean Blade 1000/2000 which had them in the chassis.
>
> The 3X00 and 4X00 did not have any provision in the chassis.
>
> Peter
>
> Sent from my iPad
>
> > On 3 May 2021, at 18:02, Robert Toegel <rjtoegel at gmail.com> wrote:
> >
> > o;?Well, my Ultra 80s have them on the chassis but you could miss them if
> you
> > don't know where to look.  Of course at my age, I could miss anything.
> >
> > Nob
> >
> >> On Sun, May 2, 2021, 20:56 Thomas Pelki <thomas.pelki.1969 at gmail.com>
> wrote:
> >>
> >> Not sure where they are hidden *IF* they were on the E4000/E4500..
> >>
> >> -Thomas
> >>
> >>
> >>> On Wed, Apr 28, 2021 at 9:50 AM Robert Toegel <rjtoegel at gmail.com>
> wrote:
> >>>
> >>> You don't have the factory tool "hidden" on the chassis somewhere?
> >>>
> >>>
> >>> On Tue, Apr 27, 2021, 18:59 Thomas Pelki <thomas.pelki.1969 at gmail.com>
> >>> wrote:
> >>>
> >>>> does anyone know what the torque should be? I'm gonna be receiving new
> >>> CPUs
> >>>> and want to make sure I don't overtighten or under-tighten the CPU to
> >> the
> >>>> CPU/Ram board of my E4500.
> >>>>
> >>>> -Thomas
> >>>> _______________________________________________
> >>>> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
> >>> _______________________________________________
> >>> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
> >> _______________________________________________
> >> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
> > _______________________________________________
> > rescue list - http://www.sunhelp.org/mailman/listinfo/rescue
> _______________________________________________
> rescue list - http://www.sunhelp.org/mailman/listinfo/rescue