[rescue] FTGH: Seagate ST9144A

[Joshua Boyd]

This is a 120MB 2.5" IDE disk, available from 17603, Pennsylvania.

It spins up, and when attached via USB adapter to a Linux machine, it 
does not work.  However, it does appear to linux, and so at the bottom 
of this email are the messages to determine if this is just not 
compatible or if it is junk. Please let me know if it is just 
incompatible or junk.  Also, please let me know if you would like it 
either way.

[3088314.161102] usb 3-3.4.2: new high-speed USB device number 12 using 
xhci_hcd
[3088314.262675] usb 3-3.4.2: New USB device found, idVendor=152d, 
idProduct=2338, bcdDevice= 1.00
[3088314.262684] usb 3-3.4.2: New USB device strings: Mfr=1, Product=2, 
SerialNumber=5
[3088314.262689] usb 3-3.4.2: Product: USB to ATA/ATAPI Bridge
[3088314.262692] usb 3-3.4.2: Manufacturer: JMicron
[3088314.262695] usb 3-3.4.2: SerialNumber: 220058758325
[3088314.283099] usb-storage 3-3.4.2:1.0: USB Mass Storage device detected
[3088314.283328] scsi host8: usb-storage 3-3.4.2:1.0
[3088314.283402] usbcore: registered new interface driver usb-storage
[3088314.284732] usbcore: registered new interface driver uas
[3088315.286028] scsi 8:0:0:0: Direct-Access ST9144A                   
4.02 PQ: 0 ANSI: 2 CCS
[3088315.286595] sd 8:0:0:0: Attached scsi generic sg2 type 0
[3088315.286814] sd 8:0:0:0: [sdb] Very big device. Trying to use READ 
CAPACITY(16).
[3088315.287340] sd 8:0:0:0: [sdb] Using 0xffffffff as device size
[3088315.287350] sd 8:0:0:0: [sdb] 4294967296 512-byte logical blocks: 
(2.20 TB/2.00 TiB)
[3088315.287817] sd 8:0:0:0: [sdb] Write Protect is off
[3088315.287821] sd 8:0:0:0: [sdb] Mode Sense: 00 38 00 00
[3088315.288272] sd 8:0:0:0: [sdb] Asking for cache data failed
[3088315.288279] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[3088315.290735] sd 8:0:0:0: [sdb] Very big device. Trying to use READ 
CAPACITY(16).
[3088315.291253] sd 8:0:0:0: [sdb] Using 0xffffffff as device size
[3088315.292770] sd 8:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK 
driverbyte=DRIVER_OK cmd_age=0s
[3088315.292779] sd 8:0:0:0: [sdb] tag#0 Sense Key : Illegal Request 
[current]
[3088315.292784] sd 8:0:0:0: [sdb] tag#0 Add. Sense: Invalid command 
operation code
[3088315.292789] sd 8:0:0:0: [sdb] tag#0 CDB: Read(16) 88 00 00 00 00 00 
00 00 00 00 00 00 00 08 00 00
[3088315.292792] blk_update_request: critical target error, dev sdb, 
sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[3088315.292802] Buffer I/O error on dev sdb, logical block 0, async 
page read