[rescue] FTGH: Seagate ST9144A

[Patrick Giagnocavo]

The drive is physically compatible in terms of pins, but the detected
drive size of 0xffffffff is throwing it off.  It is being presented as
a 2TB drive.

On 3/23/23, Joshua Boyd via rescue <rescue at sunhelp.org> wrote:
> This is a 120MB 2.5" IDE disk, available from 17603, Pennsylvania.
>
> It spins up, and when attached via USB adapter to a Linux machine, it
> does not work.  However, it does appear to linux, and so at the bottom
> of this email are the messages to determine if this is just not
> compatible or if it is junk. Please let me know if it is just
> incompatible or junk.  Also, please let me know if you would like it
> either way.
>
> [3088314.161102] usb 3-3.4.2: new high-speed USB device number 12 using
> xhci_hcd
> [3088314.262675] usb 3-3.4.2: New USB device found, idVendor=152d,
> idProduct=2338, bcdDevice= 1.00
> [3088314.262684] usb 3-3.4.2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=5
> [3088314.262689] usb 3-3.4.2: Product: USB to ATA/ATAPI Bridge
> [3088314.262692] usb 3-3.4.2: Manufacturer: JMicron
> [3088314.262695] usb 3-3.4.2: SerialNumber: 220058758325
> [3088314.283099] usb-storage 3-3.4.2:1.0: USB Mass Storage device detected
> [3088314.283328] scsi host8: usb-storage 3-3.4.2:1.0
> [3088314.283402] usbcore: registered new interface driver usb-storage
> [3088314.284732] usbcore: registered new interface driver uas
> [3088315.286028] scsi 8:0:0:0: Direct-Access ST9144A
> 4.02 PQ: 0 ANSI: 2 CCS
> [3088315.286595] sd 8:0:0:0: Attached scsi generic sg2 type 0
> [3088315.286814] sd 8:0:0:0: [sdb] Very big device. Trying to use READ
> CAPACITY(16).
> [3088315.287340] sd 8:0:0:0: [sdb] Using 0xffffffff as device size
> [3088315.287350] sd 8:0:0:0: [sdb] 4294967296 512-byte logical blocks:
> (2.20 TB/2.00 TiB)
> [3088315.287817] sd 8:0:0:0: [sdb] Write Protect is off
> [3088315.287821] sd 8:0:0:0: [sdb] Mode Sense: 00 38 00 00
> [3088315.288272] sd 8:0:0:0: [sdb] Asking for cache data failed
> [3088315.288279] sd 8:0:0:0: [sdb] Assuming drive cache: write through
> [3088315.290735] sd 8:0:0:0: [sdb] Very big device. Trying to use READ
> CAPACITY(16).
> [3088315.291253] sd 8:0:0:0: [sdb] Using 0xffffffff as device size
> [3088315.292770] sd 8:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK
> driverbyte=DRIVER_OK cmd_age=0s
> [3088315.292779] sd 8:0:0:0: [sdb] tag#0 Sense Key : Illegal Request
> [current]
> [3088315.292784] sd 8:0:0:0: [sdb] tag#0 Add. Sense: Invalid command
> operation code
> [3088315.292789] sd 8:0:0:0: [sdb] tag#0 CDB: Read(16) 88 00 00 00 00 00
> 00 00 00 00 00 00 00 08 00 00
> [3088315.292792] blk_update_request: critical target error, dev sdb,
> sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
> [3088315.292802] Buffer I/O error on dev sdb, logical block 0, async
> page read
>
>
> _______________________________________________
> rescue list - http://sunhelp.org/mailman/listinfo/rescue_sunhelp.org
>